“Starting a Plastic Manufacturing Plant”
Comment Page 5

  • Anurag Agarwal said on October 14, 2012
    Sir, I want to set up a small scale factory in Baddi. Please guide as to what can be done now. I am open to injection molding unit and other. My degree is in electronics and communication engineering.
  • swati sethi said on October 15, 2012
    hello. i want to start plastic glass and plate(disposal) factory. i want to start this business in yamuna nagar, haryana. how much money is needed for starting. please give me whole details on swatisethi07@gmail.com. thank u so much.
  • Dr.Mahesh said on October 16, 2012
    Hello @VIJAI BHASKAR, I am interested in setting up disposable syringes factory. Could you please help us in this field. I can meet you in person if we need to. Kind regards , Dr. Mahesh Reddy
  • VIJAI BHASKAR expert adviser said on October 16, 2012

    @Dr.Mahesh, Disposable project is not feasible unless you manufacture 2.0  lacs / day. The project cost will tentatively be around 3 crores. Indian and foreign designs are available . Contact me if you wish to peruse it further. Best Of Luck.

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • neeraj sharma said on October 19, 2012
    want to start business in plastic recycle at home town amroha(u p) have a 12 yrs plastic compounding as tech person
  • Kevin said on October 20, 2012
    Dear sir, I just want to know the way of producing plastic carpets in the recycle plastic
  • VIJAI BHASKAR expert adviser said on October 24, 2012
    Dear friends, We will discuss only recycled plastics bags used for potting plants. Mind you plastic bottles usually are made of PET and cant be recycled into bags. Only Milk pouches and water pouches and plastics shopping bags which are sources of POLYTHENE.

    You will need to wash the bags, grind them, dry them, extrude the plastics and cut them into granules .You can mix colours and use black colour for garbage bags and horticultural nursery bags. The granules are put into a 40/50mm blown film extruder and bags are cut to size with the help of a bagmaker.

    Recycling machinery - Rs 10 lacs to 25 lacs based on output and make
    Blown film machinery - Rs 10 lacs to 25 lacs based on output and make
    AREA requirement : 1000-2000 sqmt
    Manpower - 2 operators 10 helpers
    Vijai Bhaskar.K, 81211-85183, vijaibhaskar@gmail.com

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • Mihir Thakkar said on October 26, 2012
    hello sir. my name is mihir. i am 21 yrs old. i want to start a plastic moulding warehouse.. once established later i wanna specialize in any one item initially. which one should i specialize on? and moreover how much will be the investment?
  • karun jain said on October 27, 2012
    i want to start thinner manufacturing plant but not have any basic knowledge of this, how to make how to sale i am living in mumbai-sakinaka. is there is any concerned institute who provide training or help for the same
  • Victor Isaac said on October 29, 2012
    Am victor isaac, from Akwa Ibom State, Nigeria. Am a university graduate who has been searching for job for a long time now, but to no avail. I want to start a small scale plastic processing plant where i can produce materials like; plastic cups, bucket, chairs, table. etc. Please i will really appreciate it if u can give me a list of equipments involve, and possibly the approximate cost of setting up this industry. thank you and God bless.
  • Ghassan Najjar said on October 31, 2012
    We are willing to manufacture Gloves for medical applications. We like to purchase an existing plant or invest in setting up a new plant in Saudi Arabia. We need support to provide technology and equipment.
  • vivek kumar pal said on November 5, 2012
    i am vivek ,i want to start a new small plastic plant in low budget. but i have no any exp in plastic industry. new plastic industry city is developing. dibiyapur , Auraiya, Uttarpradesh, India
  • IRENE said on November 5, 2012
    I would like to start business in plastic manufacturing products .Steps how to start ,business plan and requirements. My business will be in south Africa(Nothern cape).
  • Madhu said on November 8, 2012
    Hi sir, i am interested in paper plate making machine that one give my life bright future ..?
  • yogesh said on November 12, 2012
    i want to plastic product plant give me the detail information about investment, machinery address, licenses require raw material required.
  • Mango Tshabangu said on November 15, 2012
    I would to start a business making unbreakable plastic basins and buckets. Please advise 1. ingredients 2. machinery. MT, Johannesburg, South Africa.
  • moiz said on November 17, 2012
    I have to start a plastic factory in a small disbatujain madhypradesh
  • Vinod Chinchani said on November 18, 2012
    Dear @VIJAI BHASKAR, I want to start a plastic manufacturing facility. I am willing to invest up to Rs 1 crore and am capable of running the facilities. I want to know from you which is the fastest running activity at this time and whether my limit of investment will be able to run it successfully. For your info I am a C A and having more than 20 years experiences ( I was in service all through ). I would also like to have the details whether you can set up the project for me till product stabelisation. Thanks and Regards, Vinod Chinchani. 00971-50-4627102, vchinchani@hotmail.com. I would like to have your contact no so that I can get in touch with you
  • NDAHIMANA Claude said on November 18, 2012
    Dear Sir, i am NDAHIMANA Claude Managing Director of N.C AFRICAN Trading ltd from Rwanda in east Africa. i really need your help to give me orientation on what needed to establish a plastic manufacturing plant in Rwanda because we don't have any way to know this like what kind of machines needed, low materials, Employees, the land needed and other related information, we need to manufacturing this products:- plastic chairs, plastic buckets, plastic Jerry cans, pates, cups, bottles, plastic pipes and other households plastic products. and later PVC pipes. please help us to know this and give us other sources of information. yours!!!!!!!!!!
  • Atul kumar sharma said on November 19, 2012
    Dear Sir, I want to start small scale industries near Alwar India. After doing lot of R&D on Market research on internet on different product right from Dairy product to Plastic products finally i want to go with making cheap & best plastic product in rajasthan market over all over india starting from Rajasthan. My final aim is to make Rajasthan a cheapest product manufacturing place to beat any of the world in terms of quality & price & make Rajasthan not only hub of India but of the world. It seems impossible at starting but i would like to start with Auto part & would not for small but for multinational company & compete with Chinese product. My back ground is Mechanical engineer working for top reputed company of India in the filed of Plastic sheet metal & forging casting. i don't know machine setup & work culture in Plastic industries. Please Please Pls. help me to make one of the poorest place of the world to become better place for everyone of the world. Pls. help me & give me your course . specially how can i start it with.
  • srinivas rao said on November 22, 2012
    sir. i want to start a small industry make pvc electric round junction box please tell send me what kind raw materiel used it ' and pvc injunction moulding machine detailed. Guntur. Andhra pradesh. INDIA.
  • Amitkumar Kamble said on November 22, 2012
    Hello sir, Myself Amitkumar from At/Post - Shirol Dist - Kolhapur Maharashatra India. I have completed my diploma in Plastic Engineering. And currently i am working with an automobile company in pune. But i am willing to start my own plastic carry bag and packaging bag manufacturing unit near my town. I have some quires - such as 1)from where i will get complete information about plant set up with estimated set up cost. 2)Complete information about required specific raw material grade, machine and machine manufacturer. Need your expert opinion.
  • anand said on November 25, 2012
    new plant manufacturing started price detail
  • Karthikeyan said on November 27, 2012
    Am Planning to start a Business in Tamil Nadu, Need support 1) how to get Loan with Subsidy from Government, 2) what kind of Business can i start 3) how much will be the investment, 4)Process and detailed procedure to carry forward the same, My requirement is a Consultant who can guide me. Contact 09047089009/akarthikn@gmail.com
  • haneesh hamza konoth said on December 1, 2012
    hallo sir, my name is hany, i like to buy a plastic bottle manufacturing machine , which one is the best , give advise ,
  • M.C.Agrawal said on December 4, 2012
    I wish to establish an SSI for manufacturing the HDPE pipes at jaipur. I am an MBA student having site at industrial area at jaipur and finance is not a problem to me. Can any one guide me about the project report with details of machineries to be procured, availability of Raw materials, and market available including the prospects of export if any. what are the probable risks and future prospects of the project. please also advise me the scale of operations at initial stage and govt policy with regard to the product. Thanks M.C.Agrawal
  • VIJAI BHASKAR expert adviser said on December 5, 2012
    @M.C.Agrawal, I can send you a detailed project report based on the scale you are planning. What is the output and sizes of pipe you wish to make. regards

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • M.C.Agrawal said on December 5, 2012
    @VIJAI BHASKAR...Sir, Apart from land I can invest about Rs.100 Lac in the project. Further I am planning to produce around 220 MT in one shift. The pipes to be produced will be of various sizes being used in sprinkler irrigation system, sewerage and potable water supply. Apart from it I wish to know an idea what else can be produced to give a boost to sales in the future. Can you suggest me the project size to be undertaken by me at initial stage of my business along with the future diversification of line. Thanks and regards. M.C.Agrawal
  • Rahul Mehta said on December 6, 2012
    Dear sir, I want to start a manufacturing of disposable plastic water glass, ice-cream cups and plastic spoons so can u plz tell me how much investment, land area it needs for better & faster manufacturing. i am from uttar pradesh(bareilly)
  • ravi said on December 9, 2012
    I live in Lucknow. I want to know about the scope of opening a disposable & plastic glass manufacturing plant in Lucknow. kindly also give the least starting cost of the above said and what is the profit rate in this business, the license required for setting up such business and the number of workers required for running such business. Please also give the details that how can i get the buyer for my products. I am expecting your valuable advice and knowledge for this. Sir please write to me. Thank you.
  • Shahid Sohail Mirza said on December 10, 2012
    Dear alls. I have the experience in the plastic industry, injection moulding machines blow moulding pet preform manufacturing and blowing. I have training in the manufacturing of disposable syringes and needles. If there any body wants to start the syringes plant I am in the position to help him thats why i want to leave the Pakistan. my no is 00923005629087 email shahidsab@yahoo.com
  • krispin malekela said on December 12, 2012
    i live in tanzania. I want to start a company producing bags by using plastic materials.
  • sandip said on December 13, 2012
    dear sir/madam, i want to start a plastic bottle manufacturing in terai part of nepal.. so plz will u help me by letting me know about the total cost for starting a medium scale manufacturing unit and what sorts of machinery will i have to use for achieving this goal. with lots of regards....
  • Abdul navas said on December 14, 2012
    I like to start a waste plastic crushing machine unit( cut it in to small pieces). I like to start this unit in kerala. I like to know the machine price.
  • vinod bansal said on December 14, 2012
    I am interested to set up isi mark hdpe, mdpe pipe plant in v.k.i.a. Jaipur kindly help me in detail. I am having approximately 4000 sq. feet covered area in Vishwakarma industrial area-Jaipur
  • Aman yadav said on December 15, 2012
    I would like to open mineral water production plant in Barhal Ganj , gorakhpur ,Uttar Pradesh , India . Please tell me the estimated expenditure . Thank you
  • Sanjay gandhi said on December 15, 2012
    Respected sir, I stay in ralegaon Dist. Yavatmal, Maharashtra. I have a dream to start my own business and fulfill my families dream. I want to start my business in pipe manufacture. It will be really helpful if you guide me through the set up cost, plant and machinery cost, raw material, subsidy and all the minute details that I should keep in mind for the set up. Awaiting your reply. Your help is highly appreciated. Thanking you, Sanjay Gandhi- 9423266570, Mail id- yashsgandhi@gmail.com
  • bhat reyaz said on December 19, 2012
    Sir i am from Kashmir and want to start an injection moulding plant . I want to know about the investment and the place where from i can get this machinery
  • varun Kumar said on December 21, 2012
    dear sir, I want to start a new business of plastic can u suggest me about machinery. where I can sell my product and I want to start my business in bawana industrial area new Delhi and my budget is 5 to 8 lacks can u suggest me.
  • salma said on December 23, 2012
    sir, i want to start a small scale industry of plastic molded items (kitchen items like mugs, bottles, buckets, chairs etc.) at our at ichalkaranji , dist:kolhapur of maharashtra. please give information about estimation of cost, from where i get the machinery and raw material and other information.
  • RAVI.GIDDALI said on December 23, 2012
    I start a mineral water 1 ltr and 2 ltr and 20 ltr plastic caps plant .machinery Where is available in karnataka or other state there investment .i start in Koppal karnataka state india country
  • vasu said on December 24, 2012
    Hi. I am from guntur. i am starting a small scale industry of pvc electric junction box manufacturing unit. Please send me what quality of pvc granules used in. Thanks sir. My Email id: srinut65@ gmail.com
  • manoj kumar said on December 26, 2012
    hi, I am manoj kumar having experience of 25 yrs in plastic injection mldg plant and traveled so many countries for installation of big tonnage m/cs. currently I am working with Taiwanese co. For any kind of help and advise pl do sms me or email to me. my cell no. +919810298932 and e mail id: manojj5gn@yahoo.co.in
  • sandeep jangra said on December 29, 2012
  • Hannan said on December 29, 2012
    Hello, sir i am in Riyadh and i would like to setup a small scale plastic bag making unit in saudi ! can u please tell me how much would be the total investment to start with the small scale ! i will be waiting for ur response !
  • Emmanuel said on December 30, 2012
    I want to start a plastic chair making factory. Can you assist with the average cost of setting up such a factory? Also, what are the basic technical requirements in terms of staffing?
  • JAYESH PATEL said on January 2, 2013
    sir i am interested in starting toothbrush manufacturing as a co manufacturer for colgate. i need to know cost of the plant and also production cost. i will start in baroda, gujarat.
  • Vinod kumar said on January 2, 2013
    Sir i want to start a plastic glass and plates factory i.e. disposable items. So pls send me details about required things. Thank you Sir.
  • Mithun said on January 2, 2013
    Hi sir, i am living in maharastra pune. i want to start my own business in various type of plastics bags. so i want information about how capital require in this business. and my investment capacity is 15 to 20 lacks. so please reply me about this information. thanks.
  • abhishek said on January 4, 2013
    hi, i am planning to open up a manufacturing plant of plastic products like drums, buckets, bottles etc in ASSAM. i wanted to know how much land area and investment is required to open up this unit.
  • Matsimba said on January 5, 2013
    I'm based in Gauteng Province, South Africa and would like to commence a small plastic manufacturing business - bottles, plastic bags etc. I have done my research and all the available equipments prices appear to be beyond my budget. Where can I find simple, cheap and effective plastic molding technology particularly for a home-based operation? Please assist me on this one. Please drop a note on matsimba@hotmail.com
  • Lungisani said on January 6, 2013
    I have been working in the manufacturing industry for 7 years using machines, i am more interested in the packaging engineering. Making of bearings, valves and sprockets. I am in Pinetown, KZN. South Africa
  • cbsingh said on January 6, 2013
    Hallo sir, i want Entry in house hold plastic product so i want new look product for manufacturing. please help me
  • gourav said on January 7, 2013
    Hi, i am pursuing c.s right now. i wish to start a pvc pipe plant after my studies. i want to know that does mpfc finance equipment. and how much does it cost(approx.)to set up a pvc pipe plant.
  • Jaskaran Singh. said on January 11, 2013
    Hi. I want to start a plastic product manufacturing factory which specializes in making plastic spoons, plastic trays and other products. Please help me in giving the information about the Cost in setting the factory and other costs. The location of the factory is in Winnipeg, Manitoba, Canada.
  • Frank said on January 11, 2013
    Hi I am based in Ghana and i wish to start an injection mold plastic business. Can you advice
  • Yash magar said on January 12, 2013
    Dear sir I want start my own business like "use and through plate maker plant "plz guide me.
  • Shridhar said on January 14, 2013
    Dear Sir/Madam, I wanted to start a small scale industry of PVC pipe & fittings can you guide me for Total estimation cost to start the business and Tips better growth. Regards, Shridhar
  • VIJAI BHASKAR expert adviser said on January 17, 2013
    @Yash magar, Disposable items Project basic Information
    1. Raw material required and supplier. (PP) – Reliance Industries / IOC / Haldia / HP‐Mittel energy and import of R/W materials.
    2. Machinery offered by Rajoo Engineers Limited: Different capacity cost & space.
    Project – 1
    30 tons finish products per month production capacity.
    50 tons finish products per month production capacity.
    90 tons finish products per month production capacity.
    Total Required RAJOO Machines.
    1 no 65 mm screw size Sheet Line + 1 No Rajoo TFM machine.
    1 no 65 mm screw size SheetLine + 2 Nos Rajoo TFM
    1 no 100 mm screw size SheetLine + 3 Nos Rajoo TFM machine.
    Required Factory Building Size. 4000 Sq. Feet carpet area building.
    6000 Sq. Feet carpet areabuilding.
    10000 Sq. Feet carpet area building.
    Finish production
    Out Put per day.-
    1000 to 1200 Kg per day
    (Considering 16 to 18 hours TFM working & consider average low
    GSM weight of articles)
    2000 Kg per day
    (Considering 16 to 18 hours TFM working & consider average low
    GSM weight of articles)
    3000 to 3200 Kg per day
    (Considering 16 to 18 hours TFM working & consider average low
    GSM weight of articles)
    Budgetary machinery prices Price
    57 lacs + Taxes 82 lacs + Taxes 144 lacs + Taxes
    Other Machinery to be required
    & it’s budgetary prices
    10 ton water chiller – 4 lacs.
    2 nos Moulds ‐‐ 10 lacs.
    100 Kg Hr. grinder – 3 lacs.
    100 CFM Air compressors – 4 Lacs
    60 TR Cooling tower – 1 lacs
    Other misc exp. – 3 lacs.
    Total ‐ 25 Lacs.
    20 ton water chiller – 7 lacs.
    5 nos Moulds ‐‐ 20 lacs.
    150 Kg Hr. grinder – 4 lacs.
    175 CFM Air compressors – 5 lacs.
    120 TR Cooling tower – 1.5 lacs
    Other misc exp. – 3.5 lacs.
    Total ‐ 42 Lacs.
    30 ton water chiller – 9 lacs.
    20 ton chiller for sheet Line – 4 lacs
    6 nos Moulds ‐‐ 25 lacs.
    150 Kg Hr. grinder – 4 lacs.
    200 CFM Air compressors – 6 lacs.
    Other misc exp. – 5 lacs.
    Total ‐ 53 Lacs.

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • rakesh said on January 18, 2013
    @vijai bhaskar i'm very much interested in setting up a recycling plant for plastics (PET). could you please help me with the machinery suppliers and the estimation of setting up the plant. regards kumarsrakesh@gmail.com
  • yusuf motorwala said on January 18, 2013
    hi sir i want to start a business of plastic glass can u give me from where i will get row material and machinery for that thanks
  • VIJAI BHASKAR expert adviser said on January 19, 2013

    @yusuf motorwala, The project of 3 capacities has been explained in 260. Read it completely and if you dont understand then write to me. Best Of Luck

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • Ravinder Kumar said on January 19, 2013
    We want to establish a plastic pipe (PVC Pipe) industry in hamirpur, himachal pradesh so please guide me for investment and raw material etc. and other guideline for new industry/company and which machine require and cost of this.
  • Anshumaan Dey said on January 22, 2013
    Good Evening, Myself Anshumaan Dey B.Tech in chemical Engineering from Nagpur University. I would like to set up a PVC manufacturing plant. I live in New Delhi, India. So sir please guide me with the area of land required initially as well as with other details of initial Capital Cost..etc... Thanks in advance.
  • karan said on January 24, 2013
    Dear sir, I live in new delhi. i want to start plastic factory (kitchen, & daily uses product). so i request to u pls help me. My mobile number is 9266387985, 9212158985.i want to start this factory in varanasi. thanking you, karan
  • A.P.M jeberson said on January 26, 2013
    Dear sir, I wish to start a PVC manufacturing company . could you plz let me know the detailed outline. my mail ID is ajeberson@gmail.com
  • Bhanwar lal Choudhary said on January 29, 2013
    I wants start plastic factory for bucket & jug so give information machine price & investment & space for factory
  • sudhir said on January 30, 2013
    Dear sir, I want to start injection moulding plant in indore. PL guide me
  • Pankaj Rani said on January 31, 2013
    Dear Sir, Sir i want to know the growth prospective in manufacturing of plastic mats. Is this manufacturing business profitable? Who are the major players in UP and other sates in this field? Kindly attach any fruitful data regarding this with the reply.. thanks
  • Abdul rehman khan said on January 31, 2013
    Dear Sir, I want to start a plastic manufacturing unit for scrap plastic Or shirts buttons. Can you guide me regarding what type of product can I manufacture, what type of machinery will be required and material.
  • Akhil Goel said on February 3, 2013
    Dear Sir, I will be planning to set up the small unit for manufacturing of disposal kitchen items in U.P (Noida) and I need your help to know the overall project cost including (unit setup, manufacturing cost etc.). So please send me all details about that business like manufacturing process, investment, registration & profit etc. Your Kindly help and value time is much appreciated. Thanks, Akhil
  • vaibhav said on February 4, 2013
    Dear Sir, I wanted to know about the licenses required for setting up a manufacturing unit in the plastic industry...or any website where i can get information on the licenses for the plastic industry
  • rahul said on February 5, 2013
    i want to setup a plastic chair manufacturing unit in west bengal india. can u please help me with details of investments and factors feasible to put up such a unit.
  • ashish kumar said on February 7, 2013
    dear sir i am from bihar and i want to know about the plastic industry and investment, please guide me
  • logananth.v said on February 9, 2013
    I am Logananth from Salem, Tamilnadu, India. i want to start plastic bucket, mugs and housekeeping material manufacturing company. i don't have any idea about that. please, give idea about investment and machinery details.
  • vivek modi said on February 9, 2013
    Hello I am from kanpur u.p. I want to manufacture a plastic pvc pipes. so plz give the whole details and procedures regarding machine, raw materials etc. for setting up an industry of pvc pipes....08604111112
  • jagdish patil said on February 9, 2013
    sir i am planing to start my own business of manufacturing white staple pin please send me detail project report
  • james prince said on February 13, 2013
    If you are serious contact me on my email address princecozy@yahoo.com, let's discuss business
  • umakant said on February 15, 2013
    Sir, i want to start pipe manufacturing plant i want to know about machineries, raw material, about cost of plant
  • hari said on February 16, 2013
    vijaibhaskr sir i want to make granules from waste plastic i want 2 ton everyday production what the machinery cost and who sales that machine
  • Sourav Jain said on February 17, 2013
    sir i want to set a production unit for disposal thermo products i.e glasses, plates etc. also napkin & toilet tissue papers. in siliguri, west-bengal on a small scale. plz let me know about the starting investment. also let me know whether it would be appropriate to set up such a plant in & around siliguri. and what would be the best place to set up such a plant where we can get maximum tax relief & a huge wholesale market.
  • Pankaj Maheshwari said on February 18, 2013
    Dear Sir, I want to start a manufacturing unit in Siliguri for plastic goods. My electric connection requirement is 85 kilo watts how do I apply for electric connection. please guide me on the procedure and documents required for the same. Regards Pankaj
  • SURESH said on February 19, 2013
    Andhra pradesh, ysr kadapa (dist), how to start plastic bot tiles industry in kadapa , give me breaf presentation on starting to finishing goods, rules & regulations , how to approach the bank and govt schemes,
  • shubham kumar said on February 21, 2013
    hello sir/mam, my name is shubham kr. and i want to establish a plastic manufacturing concern at rudrapur city in uttranchal state with the minimum production of 20 tons. please provide the necessary information with little ethics too.
  • Santosh Rai said on February 22, 2013
    Dear Sir, Please share me details for setting up a plant for manufacturing of plastic utensils or other small regulars utilities item like bottle, jars etc in Near by Kanpur, Uttar Pradesh India. Further, If you share means of finance for the commissioning this plant and future market of plastic utensils. Because, I don't have more capital to invest.
  • Mritunjay kumar singh said on February 23, 2013
    I want to start a plastic glass and plate manufacturing factory. how much cost incur on the same. i want to start in vadodara please help me to find out lay put and others details
  • Parveen Kumar said on February 24, 2013
    Dear Sir/Madam, We want to setup a plant for biodegardable carry bags as it seems there is good future for the same. Location of the same shall be Gurgaon/NCR. Kindly let us know the machine providers, raw material and process flow for the same. A visit to a industry will be a great thing to understand the same. Looking for a favorable and timely reply. Thanks and regards, Parveen Kumar, 09671981555
  • Ushma Gramya Vikas Trust said on February 27, 2013
    @Saurav , pl.contact 099245 76998 Himatbhai Parmar I will explain you or send details on plastic project
  • vijay sarda said on March 2, 2013
    Hi I am interested in installing a Plastic & paper moulding industry wherein the products will be such as disposable items. the location would be probably Kolhapur, Maharashtra. Pl guide me for the m/cs reqd, legal requirements & total project cost
  • subodh kumar said on March 3, 2013
    sir i am from bhagalpur bihar and want to start plastic moulding business like making of disposable cup, plats etc. please give the all details to establish with total investment.
  • Pantho said on March 3, 2013
    Dear Sir, I from Bangladesh, interested in butcher plastic bag production in order to export. my preferred location is Mongla EPZ where no gas facilities but just two and half hr. away from India and 20 mnts from Mongla Port. I'm really new in this sector and also seeking a foreign partner. would you please provide me any sample of a complete project detail. eagerly waiting for your response to pantho_ru@yahoo.com
  • Mohd.Junaid Chaudhry said on March 7, 2013
    Hi, I was thinking to start a manufacturing plant of plastic in uttrakhand kashipur (u.s.nagar). i am a fresher in plastic line. i want a advice that which plant i should start. please give me a good and profitable advice. please do reply (junaidkhn27@yahoo.in) or u may call me at 09917700412.....thank you...
  • huzaifa hakim said on March 7, 2013
    I am interested to set up an small scale factory that could manufacture plastic . i just want to know that what investment is required and whats the cost of a machine?
  • jitesh kumar sethiya said on March 9, 2013
    dear sir, i am belong to udaipur(rajasthan) and i want to start plastic granules production plant. so i need how much investment and how much space required for it
  • sandeep singh panwar said on March 10, 2013
    dear sir, I am sandeep fro-barabanki(up, india) I want know cost of the plastic glass making machine. low & high cost, where I can buy this machine in india. mob num-08756180481
  • Prakash Agrawal said on March 13, 2013
    i want to establish disposable plastic glass, plates, cup, spoon etc. manufacturing plant so i would like to know about detail of plant & machinery, process, about raw material.
  • iyke said on March 13, 2013
    good day sir, i am a nigerian & i stay in the city of lagos. please, i need a business plan/proposal for plastic moulding (for a small scale business). Please i need it today. Any information you have on this should be sent to my email. Thanks.
  • David said on March 14, 2013
    I live in Lagos, Nigeria, West-Africa. Please can you educate me on what are the costs involved in setting up a medium scale PET Factory (Not a recycling one). I will be glad to receive your response through my email. Thank you, David.
  • sudhir naikwadi said on March 16, 2013
    Dear sir, plz suggest me about plastic tea & water cup manufacturing. i want total procedure about same like total investment for starting new unit any training required presently i'm working in aluminum industry.
  • kiran dhane said on March 16, 2013
    Dear sir, I want to start PET plastic bottle manufacturing plant. in satara( Maharashtra). please help me give me only one answer they are success plant in my future. plz tell me this product market value & requirements. I am waiting.


(All the above fields are required.)