“How to Start a Packaging Company”
Comment Page 1

  • NILESH KULKARNI said on August 22, 2012
    I want start to small scale industries of spice product . can u give me guidance about production & packing items
  • Ajay Jaiswal said on August 23, 2012
    Hi, I want to start a small scale plant of carton and corrugated box manufacturing. i have working experience in pharma packing industries. can u help me to know some basic knowledge to start my own plant. such as machinery, raw material, legal requirements, license (if any) and govt. norms. I will be very thankful for your kind help and support. Ajay Jaiswal
  • Saravanan said on August 29, 2012
    Hello Sir, I would like to setup small scale carton box industry in vellore located between chennai and bangalore. I am basically mechanical engineer having 12 years experience in vendor development & sourcing. currently am working in saudi arabia. I have my own land in vellore about 1800sqft. I would like to set up carton box manufacturing set up in a small way in this area. Please help me get details on machines and working capital cost.
  • Amjad said on September 1, 2012
    I like to start repacking business of sugar in Saudi Arabia.Please can you help me that how much the capital is required for it.
  • krishna said on September 3, 2012
    hi, sir i am krishna, I want start to small scale industries of tea product . can u give me guidance about production & packing items, in chakan, pune.
  • Mr. Abraham said on September 4, 2012
    Hi, If any one want to start re-packing tea product. Plz contact me. Very less investment and you can easily manage from your home, Plz contact. Mob 07798496551 ( benabraham2000@gmail.com)
  • ujjwal said on September 9, 2012
    right now i have no business but i want to start in ALLAHABAD so i want to know idea
  • Munish gupta said on September 13, 2012
    I would like to start packaging & printing business ,Having 2000 square yard factory in Kundli , Sonepat ( Haryana). Please advise how to start .
  • SACHIN SAMBRE said on September 13, 2012
    i want to start a ssi unit of spices packaging unit such turmeric powder, chilly powder, dhaniya powder etc. i want total guideline from u that how to start the ssi unit which packaging machines i have to purchase for packing of 50 grams , 100 grams 200 grams pouch and which grinder is used for haldi, and mirchi powder to pack near about 5 ton material in a ship and which license i have to register and what for trademark guideline also and i have to set up the whole unit in near abt 15 lakh. location in jalna, maharashtra, india my contact no ( 9049825825 )
  • ade said on September 13, 2012
    I currently design and import packaging product and supply the food industry. I want to go into packaging (Corrugated packaging) manufacturing, and i am looking for suitable training courses. Lagos, Nigeria
  • ARJUN KULKARNI said on September 15, 2012
    Hi, I am located in Dharmabad, dist nanded, MH. I am having 2 acres of land where i would like to start packing industry of dal, rice and mirchi. we have large manufactures in our locality for this but they sell in bulk like minimum 100kg bag. i would like to start a brand under which i will sell their products in small packages of 200gm, 500gm etc. pls suggest me the machinery requirements, the process involved, Capital involved. Governments required approvals and schemes regarding the same.
  • VIJAI BHASKAR expert adviser said on September 15, 2012

    @munish gupta, you will preferably need to start with 4 colour rotogravure ,slitting rewinding ,lamination and pouching machines. This will do if you are not manufacturing films yourself. This way you can use polyester ,bopp bare films,laminate them and then print them and make pouches of them. This way you can market directly to the end user who packs his product.

    The equipment will cost around 100 lacs -200 lacs based on the accuracy and atomization required. Have two lines so that you can deliver as promised. There will be continuous investment on rollers which are needed for printing machines for every design.A working capital of at least another crore will be aptly required.

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • VIJAI BHASKAR expert adviser said on September 15, 2012

    @Rahul Deshmukh, EPE Project is around 5 crore. So people who manufacture it dont even consider fabricating /cutting it which is a manual process. What i have seen people who make PP FLUTE BOARD /CORRUGATED BOARD boxes from sheets. Most of these boxes used in pharma/diagnostic kits have EPE Lined in them. Maybe you should consider fabricating PP flute board & EPE .Each box is made manually and the equipment required is Hotwire cutting machines, die-press cutting machines, gluing and screen printing equipment

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • VIJAI BHASKAR expert adviser said on September 15, 2012

    @Schouhan, Dear Souchan, Setting up a packaging business does not mean you should manufacture any product. Trading in packaging materials is highly potential business. You can trade in the following mix of products for which you can begin with an outlet and investment of  just 5 lacs and even 5 crores will be less as your business grows. The biggest advantage is you may end up with less profit but your product does not spoil like other products..your growth will depend on how many times you have circulated your investment.

    products : LDPE BAGS , HMHDPE BAGS, JABLA BAGS,GARBAGE BAGS,ZIP-LOCK BAGS, STRETCH CLING FILM , AIRBUBBLE FILM, ALUMINUM FOIL AND LAMINATED POUCHES, NON WOVEN BAGS, RUBBER BANDS, BOX STRAPPING ,PP WOVEN SACKS, PVC SHRINK FILM, GIFT WRAP PAPER, TISSUE PAPER, DISPOSABLE CUPS & SPOONS, PAPER & PLASTIC PLATES, ETC

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • Mukul said on September 15, 2012
    hey i want to start any packaging business...and my investment is low i.e 2-3 lacs..and we are planning to take factory on rent..so can u plz tel which packaging business will be profitable...
  • Sharad said on September 15, 2012
    I want to start a corrugated box manufacturing business in Delhi, India. but i just dont know where to start from, i want it to be a small scale first and will with the demand. so anyone plz guide me with this or can provide me with a business plan or project report.
  • surya prakash sharma said on September 16, 2012
    I Want to start packaging food factory in sikar rajasthan .
  • Arvindkumar said on September 16, 2012
    Please tell me repacked formality lic. Of Glycerin c.p.
  • VIJAI BHASKAR expert adviser said on September 17, 2012
    @surya prakash sharma, Can you please specify if you are planning to set up FOOD factory or PACKAGING factory ? A bread factory will need packaging .Only large companies have a packaging film and packing facilities in their FOOD factories. I remain waiting for your response sir.

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • VIJAI BHASKAR expert adviser said on September 17, 2012

    @Biswanath Mohapatra, Frankly your relative cannot start one at such a low investment  unless you are buying some sick unit which could be older than 20 years with little working life in it . The minimum cost will be close to 1.00 crore .There is nothing like central government project .I do not know what you really mean by that.You wish to still go ahead kindly let me know what sizes of disposable plastics glasses your relative wishes to manufacture,I can advise you on the appropriate machinery and ancillaries.

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • Imran Bin Ahmad said on September 17, 2012
    I'm from Dhaka, Bangladesh. I want to start a packaging factory, so I need total solution for it.
  • VIJAI BHASKAR expert adviser said on September 18, 2012

    @Mukul, Why is that you could not read my reply at 114? Which city are you from? I am not sure you can hire a mulgi or set up shop with the money you are planing to invest. Still  if you are interested please check on 114 and pick up some products listed on it to trade. best of luck.

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • santosh.bhingole said on September 18, 2012
    sir, i am interested in starting an business in small packaging unit in pune. so plzz guide me how 2 start and what are the necessary steps should be taken 2 start the business. plzz reply asap
  • jerry said on September 19, 2012
    hi i want to start a packaging company in johannesburg south africa, please help me with the estimated capital to start this business as soon as possible
  • VIJAI BHASKAR expert adviser said on September 19, 2012

    @jerry, please refer my reply to @Schouhan above.

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • RUSSELL IAN DUARTE beginner adviser said on September 25, 2012
    Well, there are ample Equipment available in the Market, one has to decide a Budget and then move on.Gone are the days of Buying Chinese Converting Equipment as it has no value for Long term Business. You can reach me on russellian1313@gmail.com for further advice or Consultancy. Russell Ian Duarte

    9664844145 || Packaging Consultant

  • mukesh shah said on September 25, 2012
    i m interested in corrugated box making with printing on them, but i dont have any idea about it. i want to set up in jamnagar gujarat
  • RUSSELL IAN DUARTE beginner adviser said on September 26, 2012

    @mukesh shah, WE NEED TO START FROM ZERO, A PLANT CAN BE SET UP IN MANY DIRECTIONS, BASED ON YOUR BUDGET THE CAPACITY AND PLANT CAN BE SIZED. I HAVE SET UP SMALL TO HUGE SCALE PLANTS AND WOULD LIKE TO KNOW YOUR BUDGET BEFORE WE GET STARTED, RUSSELL IAN DUARTE

    9664844145 || Packaging Consultant

  • uday said on September 26, 2012
    hi i'm an m.b.a graduate and also was in supply logistics for more than 5 years for multinational companies in hyderabad recently through one of my auditors i came to know about demand of corrugated manufacturing in hyderabad, is this a good idea to start an industry of corrugated boxes kindly suggest...
  • VIJAI BHASKAR expert adviser said on September 26, 2012

    @uday, The demand for high quality packaging required for mangoes has grown multifold .It is a big investment around 2.5 crore per line automatic corrugation line with inline printing .

    Industrial pallets ,crates, is one good product that is gaining ground with a very little competition. With power situation  in the state being grim and totally mismanaged ,you better move out of the state if your mind is fixed to manufacturing. Otherwise you can trade in the products which is less riskier solution.

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • RUSSELL IAN DUARTE beginner adviser said on September 27, 2012

    If you are Interested I can Introduce you to suppliers for a turn key project for a Corrugator with Converting , that can print High Graphics, as well as do Die Cutting. get back to me and we can see how to get started

    9664844145 || Packaging Consultant

  • jignesh said on September 27, 2012
    i want to know investment for starting box making plant please guide me for that business
  • RAm Pande said on September 28, 2012
    i want to start corrugated box plant 3, 5 ply. i want to start manual plant not auto. what will be the investment. pls tell.
  • RUSSELL IAN DUARTE beginner adviser said on September 29, 2012

    I dont think its a bright idea to start manual gone are the days, it will take you a life time to deliver boxes in an age now when everything is considering high speed machines

    9664844145 || Packaging Consultant

  • Chauhan Alkeshkumar said on September 30, 2012
    Hi, i want to start corrugated manufacturing plant with 2.5 lacks. and i want also start to do corrugation west depot to collect west from corrugation industry and supply to paper mill. so pls Advice us how i can start a new business. i have a 14 years experience in corrugation manufacturing and also an experience of Abroad . i was to do Job in packaging industry from 12 years and 2 years i went to do job in Abroad.
  • henok said on October 1, 2012
    henok.gere@gmail.com hi i am from ethiopia i would like to start a packaging company in ethiopia i have 2500 m2 land in the capital and 8000 m2 27km from the capital would like to get a partner from abroad if possible
  • VIJAI BHASKAR expert adviser said on October 1, 2012

    @Chauhan Alkeshkumar, You have the experience which is very good. But your investment outlay only will allow you to buy a 20 year old machine which has less life and you will spend your energy time and money repairing the machine. All entrepreneurs should have commitment to quality, customer and timely service . With the kind of spend you cannot promise anything near to this. Kindly refrain from setting up and plan something more right in the future. Hope you will understand my suggestion in the right spirit.

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • Muna Karwa said on October 3, 2012
    i am from Odisha, Kendujhar. i am interest to start spices packing business like turmeric powder packing, Chilli powder packing etc in the rural area as there is very low cost manpower is available and i can give some employment to that poor rural people. so i am interested in the manual packing machine within the minimum capital if possible within 2 lakh which i have.questions are
    1. whether the packing business can be started within the said capital?
    2. what type of machines i have to have?
    3. where shall i get those machines?
    4. is there is any company/organization to handle marketing my packed spices?
    5. i recently got training on spices making and also applied for trade License. plz help me
  • VIJAI BHASKAR expert adviser said on October 5, 2012

    @Muna Karwa, Kindly buy the ready made polyester pouches which can be sealed with simple heat sealer. Get SEVANA Heat sealers which will cost a few thousand and start packing . Also add a brand which means you will have to procure printed pouches for various packing weights. Sell unbranded and branded as two qualities and two price points and watch which is being preferred by customers. LATER YOU CAN DECIDE ON PRINTING OR UNPRINTED based on sale values.

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • Rohit Jain said on October 6, 2012
    Hi, I am rohit jain, We are manufacturer of milk products like, paneer, cream, ghee, butter etc. at jaipur, rajastahan. now i want to expend my business and want to move into packing food. Initially i want to start packaging only for ghee which being manufactured by us only. I want to know which all licenses, approvals and machinery required for starting packing food in jaipur. My contact no. 9829439699
  • Ajay Mahala said on October 11, 2012
    Hi everyone, we are developer in industrial plots in rajasthan. If you want to setup any kind of industry or wants to buy industry purpose plot or if you want to know more about how to setup plant . Mail me ajay.osbgroup@gmail.com 9958289200
  • VIJAI BHASKAR expert adviser said on October 12, 2012

    @renuka mankar, What is the packaging project you are interested in?

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • renuka mankar said on October 13, 2012
    I would like to start business at home which product is suitable for it with no investment please suggest me
  • VIJAI BHASKAR expert adviser said on October 13, 2012

    @renuka mankar, There cannot be a business with zero investment .Then it is not a business at all. The best thing is to do AMWAY, TUPPERWAY, HERBAL LIFE, etc etc.... with little investment.

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • sudheer said on October 14, 2012
    i want to start a small scale industry. Which type of industry is batter to start. Which type of unit is getting profits. Please give me answer.
  • sudheer said on October 14, 2012
    I am in AP Gunter DIST. Which Small Scale Industry is better to start
  • VIJAI BHASKAR expert adviser said on October 14, 2012

    @sudheer, Ok Plastic bags. which ones-.LDPE,LLDPE,HMHDPE,FOAM, striped ,ono or two layer D-cut ,Handle , perforated ? Printed 4colour or 6 colour - Flexo or Rotogravure or even offset?
    You can also make water film or milk film.
    How about all of them . Wonderful.
    55 mm grooved feed exruders preferably 2 -layer film plant with die attchments like stripes, 2-layer,foam die and punch,extra airrings,extra screw, dualside 4 station winder even for slit film.Carona treater , static eliminator, printing machines, bottom seal and side seal bagmakers with perforator , punching dieshandle fixing sealers,etc
    Cost : 50.00 lacs to 150.00 lacs based on make ,model,type ,etc.
    Best of Luck.

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • Dinesh said on October 15, 2012
    i am not sure, but i want to start small scale plastic manufacturing business with minimum capital, basically have done interior designing but i want to do manufacturing business. please suggest me according to your expertise.(mumbai)
  • jai said on October 18, 2012
    Want to start manufacturing of packaging cartoon , boxes etc. For automobiles parts. Please suggest me total cost of any four good machinery, license required, Labours, area. Do email me company name who manufactures machine. Reply as soon as possible. Thank you
  • Nilam Khaire said on October 20, 2012
    I want to start a business of packaging of medicine. So tell me about requirement of license, name of pharmaceutical companies who require packaging
  • Pratik Parakh said on October 22, 2012
    sir, I want to start corrugated boxes industry at smaller level so what will be the capital required and essential expenses which will be there for this type of business. Pratik
  • Sagar R said on October 22, 2012
    Hello, I want to start a new semi-automatic corrugated unit near Mumbai. I would like to know if there are any consultants for the same who can help me with the initial market survey and feasibility report right upto setting up of the plant.
  • Akshaya said on October 23, 2012
    hi sagar, u can contact ind. consultancy services n MITCON, to find consultants. The market is good for corrugated ind. in n around Mumbai n pune. V r related to handmade paper industry.
  • RUSSELL IAN DUARTE beginner adviser said on October 24, 2012
    Certainly I can as I have been in this field for the past 30 years. Most Important for me to do so is the Budget you have in mind, as a Corrugated Plant is not as Cheap and In expensive as many feel. Regards Russell Ian Duarte

    9664844145 || Packaging Consultant

  • Bichitra Swain said on October 24, 2012
    In orissa, to setup a non-woven bag making & printing Industry at cuttack industrial area.pl.sent a project report to setup this Industry,
  • Arun said on October 24, 2012
    Hi, I just wanna start a business in plastic cups from home as home products. We are ready to purchase machine, which its can help to manufacture. so kindly contact through my personal mail ID to get start over.
  • Sanjay Kumar Singh said on October 26, 2012
    Hi I have 17 years of experience in printing and packaging industry, if any require help in industry setup and start the printing packaging unit. i am interested to work with. you can contact me 9582613651.
  • Vaibhav Sheth said on October 30, 2012
    Anyone have idea about or dealing with Tamper Evident bags? Tamper proof bags? Any printing vendor in Ahmedabad? Printing on Plastic Bags?
  • jawad said on November 6, 2012
    hi, i want to start a company of corrugated box manufacturing how much investment should i need to start pls guide me what are all the things needed in this
  • Bharat J Tosniwal said on November 6, 2012
    Sir, i wanted to know all about tamarind starch manufacturing unit, and also repack of other manufacturer starch powder what is the market potential for this and the product value addition process
  • Bharat J Tosniwal said on November 6, 2012
    i am in the neem organic Manufacturing line and now i wanted to make 100 ml packing of Neem Water soluble high quality oil so what are the license i required and the relevant machinery is there any big buyer or distributor is ready to promote my product well margin of difference call +91 9448709999
  • haribhai patel said on November 7, 2012
    i want to start manufacturing unit of corrugated fully automatic plant in ahmedabad. india. please give me complete detail for above product a to z. thanks, haribhai patel
  • Sri83 said on November 9, 2012
    Our group is planning to diversify into the packaging and food processing business. We would like to invest a particular amount in the mentioned business. We plan to set up a unit in Maharashtra, preferably Thane District. We are also willing to set up the same elsewhere if there's a better scope for the business. We'd like to know if we can find a consultant from the industry who can offer us an end-to-end solution right from planning to the marketing and sales stage. Thanks.
  • Sri83 said on November 10, 2012
    @VIJAI BHASKAR, can you please give us a brief idea of the budget for SETTING UP WPC FACILITY and the scope in India.
  • Rekha said on November 20, 2012
    Hello, Sir I am Rekha, from Hyderabad, i am not having any budget i am a middle class family and a house wife. I would like to start a work from home for women like packing of turmeric, chocolates, dhaniya etc. Is there any possible to do. If a company can send a home products like turmeric powder, dhaniya anything related to home and the women would do simply packing. i want your suggestion and help for me. Thanks
  • Tripti Sinha said on November 21, 2012
    I want to start a disposal plate, cup and glass manufacturing business. I am not getting the way that how should i start this business, what will be the minimum capital needed, and basic things which i will have to keep in mind, from where i can purchase machine and how much it will cost. If any thing i am missing please suggest. New Delhi, India.
  • ATUL said on December 3, 2012
    I WANT TO SET UP CORRUGATED BOXES PLANT IN RAJASTHAN(INDIA) ACTUALLY THIS INDUSTRY IS VERY BIG. ONE CAN START BUSINESS FROM 10 LACS TO 10 CRORE. CAN YOU SUGGEST WHICH PLANT TO ESTABLISH AND INVESTMENT AMOUNT. WHAT ARE MARGIN RATIOS ?? I AM ALSO INTERESTED IN SETTING UP KRAFT RECYCLED SHEET PLANT. CAN YOU HELP ME IN THAT ALSO.
  • sakthyanand said on December 5, 2012
    I want to start a disposable plate, cup and other disposable products manufacturing business. I am not getting the way that how should i start. What will be the minimum capital needed and where i can purchase machine and how much it will cost. I want your suggestion and help. Thanks
  • rahul gite said on December 5, 2012
    Hi, I want to know where can I get training of manufacturing corrugated boxes. I am from INDIA, MAHARASHTA, PUNE. Completing such type of training I will get the right knowledge of this Industry & I could start up with confidence. So pls. recall me as early as possible
  • RUSSELL IAN DUARTE beginner adviser said on December 7, 2012

    @rahul gite, If you send me your e-mail and your Training Requirements regarding Corrugated Industry, I can send you the right Institute. Regards, Russell iAN Duarte, russellian1313@gmail.com

    9664844145 || Packaging Consultant

  • JITENDRA KALAL said on December 8, 2012
    i want to do start business in packaging industry can you suggest me how much investment we need start packaging industry.
  • santanu said on December 9, 2012
    sir,i want to start a tea packaging and selling business from my home. i'm leaving at kolkata. near about 700km from darjeeling. i want to buy unpacked tea from darjeeling and serve to the market packed tea with my own logo. how can it possible. please give me advice. about packaging, rules and regulation, capital investment(minimum), advertisement, marketing. i will be very glad if u rly me. from santanu chakraborty, halisahar, north 24 parganas, west bengal
  • Rajeshkumar sadhu said on December 10, 2012
    I want information about the packaging industries, What are the aspect that we have to think about ! What can be the project cost in ahemdabad ! What about the future & Competition !
  • sanket said on December 16, 2012
    hello sir i want start packing sugar bag and poly bag product . but i dont have any information in production and market idea so i want help
  • Nivesh Sharma said on December 17, 2012
    I am from Nagda junction which is located in State: Madhya pradesh District: Ujjain Country : India, I want to start contract based packaging business so any idea or contact detail will be appreciated and want to know more on this , so I will look forward for your response. Regards, Nivesh Sharma, H: 07366- 241121. M: 08982436500
  • Muhammad Shafiul Alam said on December 17, 2012
    I would like to start this business in Sylhet/Dhaka region of Bangladesh. Please give me proper suggestion regarding this field of business.
  • Kashif said on December 18, 2012
    Hi i want to start a small packaging business in north india having no exp for the same. what is req and investment etc. plz help 9871552786
  • subin Bose said on December 18, 2012
    I want to start masala packing unit in Kerala I want to know that how much money required to start this factory and what is the procedure to take permission from the authority please give me good advice
  • RUSSELL IAN DUARTE beginner adviser said on December 19, 2012

    @Muhammad Shafiul Alam, WHAT KIND OF BUSINESS ARE YOU KEEN ON STARTING? REGARDS, RUSSELL IAN DUARTE, russellian1313@gmail.com 

    9664844145 || Packaging Consultant

  • SHASHI said on December 19, 2012
    WE WANT TO START REPACKING UNIT OF DRUG LIKE LIQUID PARAFFIN, GLYCERIN ,ZINC OXIDE. WE WANT PROJECT REPORT & TENTATIVE PROJECT COST
  • VIJAI BHASKAR expert adviser said on December 20, 2012
    @sanket, where are you from ? Sugar is packed in PP Woven bags. PP woven bags manufacturing costs upto 500 lacs. If you dont have capital ,You can buy rolls and laminate them with printed polyester film and make your own brand and sell the bags to retail chains. Good luck

    vijaibhaskar@gmail.com || Plastic Manufacturing Consultant

  • jay said on December 20, 2012
    hello sir, i am jaysukh i want to start my small business. please give idea...in gujrat
  • Rajeshkumar sadhu said on December 23, 2012
    I want to know about the Small scale packaging business in Ahemdabad' Pl.guide what would be the project cost & how the scope & margin in the said business.
  • Deepti KGS said on December 24, 2012
    I am searching for anybody who can repack our imported materials. The materials are in powder & granule form in 20 kg bags. We need to outsourcing the repacking it in 500 gm and 1 kg packs and carton box. Pls contact deepti_axiom@hotmail.com
  • hemant said on December 26, 2012
    i want start my business from small investment please tell some ideas . i am from vasai thane
  • prasanta mohapatra said on January 2, 2013
    i passed out MBA in marketing in smu Bangalore branch in 2012 session want to establish a packaging industry in my native village in orissa which is 35 km away from twin city bhubaneswar and cuttack but i have a very small amount for this as 15,000 please help me provide me the idea
  • H.ADAM said on January 3, 2013
    hi i would like to start a packaging company(salt, coffee, ect) could you please help me with a business plan to start one
  • Mrs pritam said on January 6, 2013
    i want to start repacking business in surgical cotton with a small amount. please help me and provide ideas and requirement of the business like area, machinery, any license from FDA etc.
  • sonia said on January 10, 2013
    i want to start the packaging business with small investment in Faridabad, Haryana, India. pls suggest how to start and invest rightly.
  • George said on January 10, 2013
    I want to make small packages like salts, viniger, more of different sauces because where i come from, all that stuff is imported from neighboring country. this is done for people after buying take a ways. How much and what kind of machines am i looking at ? Maseru, Lesotho. Southern Africa
  • Moiz A Tankiwala said on January 11, 2013
    Would like to start at Indore City in Madhya Pradesh State of India. Thinking of starting from strap manufacturing and then slowly expanding. Would like to know that, what kind plot/Power/any other utilities required. Any incentive do government extend, for these small scale industries? Investment can be in the range of 25L. Regards
  • Sreenath said on January 11, 2013
    Dear Sir/Madam, I hope to start a small scale business of selling packed turmeric powders to shops, homes etc. in kerala, India. Can u kindly tell the procedures related & what all equipments, rules & regulations needed to be done..
  • M.Das said on January 16, 2013
    I am interested in starting curry powder, rice powder, snacks, pickle and coconut oil packing business for starting. I have very little capital new idea and new technology.
  • vishnu barvelkar said on January 16, 2013
    Hi, I am interested in cashew packing. i want to invest i have money problem, i want opening company in chandgad, kolhapur please contact me any investor or adviser 8412834110
  • GAURAV MEHTA said on January 20, 2013
    Yamunanagar , Haryana. Pls advice on the entire project including complete cost , how can we have the latest & updated technology , how can we achieve the breakeven fastly? Waiting for your revert. Regards , Gaurav Mehta
  • jitendra patel said on January 28, 2013
    Dear sir, I want to start my own business in making chilli powder and target market in MP particular place but i want any suggestion of your side please give me ..how to target customer
  • sameer said on January 29, 2013
    sir i want to start a packaging business in pune , maharashtra. which have large size automobile industry. but i am confused , which type of packaging business suitable in this area...plz help.
  • SMA Rouf said on January 31, 2013
    Hello, I'm interested to set up noncorugated carton machine of 3,5 and 7 ply for readymade Garments , could you pls suggest require area to sent up this machine , require investment including machine price and other costs .Also pls suggest productivity per hour .
  • subin Bose said on February 4, 2013
    I want to start masala packing factory in Kerala where I will get low budget packing Machine and what are the requirements is required how much expenditure will com
  • anastacia lesedi marope said on February 4, 2013
    i am starting a project of packaging company as i have experience as an accountant under a packaging company in Botswana. i was interested in starting my own but because i am a citizern i can be granted a fund to start except that i need help on how to start it.i need a partner from south africa to make connection from our suppliers in south africa.

Your Comment

(All the above fields are required.)