“Setting up an Animal Feed Manufacturing Company”
Comment Page 3

  • Manoj Nayak said on February 12, 2013
    Dear sir, We are Mumbai based chemical trading company want to diversify to poultry feed manufacture unit either at odisha or at solapur as we are having industrial land in both the place. Kindly suggest the consultant who can guide for the same. my mob no is 09820191653.
  • Shahul said on February 17, 2013
    Dear Sir, I would like to establish a manufacturing unit of poultry feed in Kerala/any other state where it is suitable for this business in India. Kindly send the necessary information on all steps and resources (Project report etc.)needed for a successful establishment and take off. I like to thank you for your co operation in advance. Best Regards, Shahul
  • Mohamed said on February 23, 2013
    hi; please i need your advice. i'm from morocco and i need your help cuz i want to asset a company of animals feed but i dont know how i can begin my project; thank you
  • Vikas Singh said on February 24, 2013
    I am in the process of setting up a cattle feed industry in Jammu.(J&K)Just initiated the process. Gathering the requisite information. Can I have the guidelines regarding this particular sector.....
  • Bob Mugerwa said on February 25, 2013
    There is available a square mile of squatter free land which we would wish to make a crop product input into a planned Animal Feed Manufacturing System. Sort of starting from the beginning of the chain in this regard. The land is suitable for millet, sorghum, maize, and soya production. Please advise on this capital intensive venture an how to proceed. Thanx, Bob Mugerwa, Agro Reform Konsult P.O Box 9307 Kampala, GANDA bob.mugerwa@agro-reformkonsult.com
  • Pravin patil said on February 26, 2013
    Hi, I have a industrial plant in M.I.D.C. Murbad, Dist Thane, State Maharashtra, India.Ground floor 6000sqft A/C, 1nd floor 6000sqft non A/c. If anybody is interested in joint venture with manufacturing,or any other business and also if you advise me on the cost of the project.
  • Nteere Kiara said on February 26, 2013
    I am from Nkubu town, Meru county in the Republic of Kenya. I would like to set up a small cattle and poultry manufacturing business. Please help
  • asad atta said on March 10, 2013
    Sir in pakistan lahore i have cattle feed factory. need good formulations of livestock feed with low cost
  • Tejpal Chandrakant Shah said on March 11, 2013
    we are the exclusive dealer of the EXTRUDERS, CATTLE FEED PLANT, which are most economical, all are requested to understand, the machines, before taking any decision for CATTLE FEED MACHINES
  • Junior Theodore Henry said on March 15, 2013
    I am interested in setting up a feed mill and need a business proposal to support same. I have all the inputs / raw materials needed, but need help in formulating the plan.
  • PAMPAPATI said on March 21, 2013
    I am in to Goat Breeding project wanted to erect Goat feed unit in Karnataka near Hubli
  • shubham singh said on March 21, 2013
    sir i want to know the all detail about feed factory. how should start the project. is it save to start a factory in bihar.
  • sachin kumar dhiman said on March 24, 2013
    dear sir, If you are interested to setup a manufacturing animal feed supplement (cattle, pet swine, poultry) unit. then our group is able to any query about manufacturing unit how you start a business the earn money with excellent formulation documentation, registration certificate etc.
  • LUCAS said on March 24, 2013
    I WOULD LIKE TO SET UP ANIMAL FEEDS MANUFACTURING IN DEWAGENSDRIFT PRETOIA IN SOUTH AFRICA, THE BUSINESS FOCUS IS ON CATTLE, PIGS AND POULTRY BOTH LAYERS AND BROILER. WOULD YOU PLEASE FURNISH ME WITH INFORMATION TO GO ABOUT.
  • davies chikwanda said on March 25, 2013
    HI ALL, I INTEND TO ENGAGE IN STOCK FEED MAKING CURRENTLY I AM DOING INTEGRATED FARMING I AM KEEPING VILLAGE CHICKEN, PIGS AND FISH FARMING I WISH TO DO THIS IN ZAMBIA, CHINSALI. HELP ME HOW TO DO A NICE BUSINESS. THANKS, DAVIES.
  • shravan kumar.L said on March 28, 2013
    dear sir, i want to keep an manufacturing unit at hyd please help me about the details how much the entire project costs and also how are the profits . apart from this is they any unit related to pharma with less capital. i am from hyd. andhra pradesh, india. thanks & regards, shravan.
  • Christ Shivolo said on March 29, 2013
    I want to start and operate a plant manufacturing feed for cattle, sheep, goats and chickens in Namibia. Kindly assist me with mixing formulaes for different types of feeds. i will appreciate it if you could also provide me with information on the mills, machinery and equipment needed to run this plant effectively. Thank you and stay blessed. Regards, Christ
  • sreedhar said on March 29, 2013
    kolar, kolar city, karnataka state india country, i want to start cattle feed unit at kolar
  • Sandeep Bhowmik said on April 1, 2013
    Dear Sir, I want to establish animal/cattle fodder processing at Agartala region in Tripura there I want you to provide me information regarding the kind of Plant, cost and their information. High Regard sandeep
  • mahendra agrawal said on April 2, 2013
    This is mahendra agrawal from india. I am owning an industry based on any type of veterinary products. I would like to supply any products to those who want any type of veterinary as well as poultry products. My email address is ronak.agrawal87@yahoo.com
  • bukky said on April 6, 2013
    i am based in Lokoja. Kogi State of Nigeria and would want to produce a high quality chicken feed production on a low medium scale, please furnish me with what i need to start well: the formulations, nutritional requirements and so on. thanx sir.
  • abhinay said on April 8, 2013
    Hello sir, i am keenly interested in setting up a dog feed manufacturing unit with low investment in north karnataka. kindly help me out. thank you
  • hansraj v. harkhani said on April 9, 2013
    sir, I want to establish a feed animals company in Gujarat,Dist-Rajkot At-Jetpur. i want to know about license and registration procedure for animal feed manufacturing company.
  • Jaswant Singh said on April 9, 2013
    I am interested to established a poultry feed plant on a small scale in Jammu. Please let me know how to proceed ahead in terms of looking for feasibility, finance and other related activities.
  • dhurim lame said on April 10, 2013
    City Durres, Albania. Need to set up a production line for animal feed, 5 MT per hour initially. Already have trucks for distribution and the clients base. Any clear idea for any reliable manufacturer and the cost. Regards, Dhurim Lame
  • Nilesh bharpoda said on April 11, 2013
    Respected Sir, We are team of People want to start cattle feed production in Gujarat so please guide us on full plant price and land requirement.
  • ARUNESH said on April 13, 2013
    I want to start a manufacturing of animal/poultry feed unit in small scale industry Sitapur & Azamgarh in(Uttar Pradesh). Can you please guide me about the investment, land required and all other necessary information about this unit. Waiting for your early reply. Thanks. Ph. 9810776565
  • nandakumar said on April 13, 2013
    dear sir, already i am running cattle feed manufacture unit in tamilnadu at salem. i wish to establish my unit with quality aspect. so i need good quality formula and i need cattle and poultry raw materials details, there nutritional value details. pls send all details to my mail id as soon as possible. thank u . my no. 09865898983.
  • Sudhir rana said on April 14, 2013
    dear sir/madam i want to start a cattle feed supplement manufacturing industry on a small scale. from punjab distt. mohali. pls tell me about full procedure & department through which i have to. thank you
  • Sridevi said on April 15, 2013
    Dear Sir, Can you please let me know, which Authority will issue License for manufacturing Poultry Feed & how to obtain the application for the same. I will highly appreciate for your early response. With best regards sridevi
  • Rajesh said on April 15, 2013
    Hello, I am planning to have a cattle feed manufacturing plant. I am from the city Vizag, andhra pradesh. I wanted to start this on a small scale for local area. Please guide me with what would be initial investment for the business.
  • Prakash shinde said on April 22, 2013
    Hi, we developed cattle feed manufacturing formula for 1. bypass protein 2. Bypass Fat 3.Rumen feed . All product has 200% profit if we use it. Also we design machines for low cost manufacturing of cattle feed, fodder blocks, pl contact on email punesolar@yahoo.com Main target area should be around sugar factory.
  • ACTARY said on April 23, 2013
    i would like to establish an animal feed project please help me how to prepare it. thanks.
  • k.owusu said on April 24, 2013
    kindly advice me with regards to obtaining poultry, catfish and tilapia pelleting machine for animal feed.
  • HARASUKH KALASARIYA said on April 26, 2013
    dear sir i will start the cattle feed(animal feed) manufacture plant, please give me your expert opinion and guideline.
  • Mwangi Johnson said on May 1, 2013
    I am Mwangi Johnson a vet surgeon interested in animal feed manufacturing and I want to know all information concerning planning in establishment of an animal feed plant
  • seyed said on May 6, 2013
    dear sir. I have got business visa from south Australia and because of that I don't have enough time I should establish a business till 2013 september and I like manufacture of chicken feed in s.a please let me know about cost of that and its income, forgive me if my English language is weak. best regards seyed from iran. by the way my business is meal chicken in my country
  • nkvijay said on May 6, 2013
    sir i would like to set up a broiler feed manufacturing company at lowest cost in manipur, india. plz help me in how to do. thnx. plz send me how to set up in my email sasukereturns@gmail.com. thnx
  • SP SINGH said on May 7, 2013
    sir, i am planning to set up a fish feed factory in my town. please guide me for this venture. i will be very thankful to you.
  • Gopakumar said on May 13, 2013
    Dear Sir, We would like to set up one medium size manufacturing company of herbal cattle feed in the form of pellet. Pls let us know how to manufacturing the pellet form? Is it any type of chemical add in the row material for getting shape . Regards, Gopa kumar Shrikrishna exports
  • Anil Rawat said on May 13, 2013
    Dear sir, I want to start poultry farm and animal feed manufacturing industry in Gairsain, Uttrakhand, India, plz. send me all the details thanks.
  • ajay kumar keshari said on May 14, 2013
    dear sir, i would like to start a small scale animal feed manufacturing industry in utter pardesh allahabad can u guide me and please tell me initial investment
  • Frederick Okumu said on May 14, 2013
    Am writing from Uganda. Am new in this business of farming, but would like to do modern farm practice. I would like mainly to learn how make animal feeds. This is the section I would like to work in. I have some two cows, young and growing.
  • Frederick Okumu said on May 14, 2013
    Am from Uganda, Kampala. Am setting up this farm in Tororo eastern Uganda.
  • sanjay said on May 16, 2013
    dear sir, we are planning to manufacture animal feed product. Raw material available in periphery of 100 km are soyabean husk, grinding of pulses, cottan oilseed cover or husk, wheat bran, etc can you guide us. My cell no is +91 9850440777
  • Johny Singh said on May 16, 2013
    Dear All, I would like to know the complete information on how i can set up a small scale poultry feed manufacturing company and all the minimum requirement (like cost of machines, raw materials etc) where i can help my local poultry farmers. As i am from a small state which have been neglecting from mainland, we don't have any broiler feeds producing company in my state.So wee need to import from other places/states which is so expensive that the farmers have no margin left when it comes to selling chicken. I would therefore like to formulate and help the farmers by providing cheap broiler feeds. Please send me the complete information on prices, requirements and registration etc. Johny Singh Email Id: johnny.anu90@hotmail.com Place: Imphal, Manipur,India
  • kunle said on May 17, 2013
    Hi, please sir am into sales and supply of soya Beans based in Lagos State Nigeria West Africa. I want contact of soybean meal manufacturer both in Lagos State Nigeria and outside Nigeria that I can be their supplier. Thank you.
  • kumaar said on May 20, 2013
    Hello sir, I am from Dharmapuri, Tamilnadu. I would like to start animal feeds plant for cattle and poultry industries. can you please help me on this business. any one has detail reach out me at 8892505041
  • Oliver said on May 21, 2013
    Dear Sir, I would like to have more information in setting up Poultry feed plant in Mombasa, Kenya-East Africa. Email: oliver.otieno1@gmail.com
  • Shamsul Salim said on May 22, 2013
    To whom it may concern. I'm in the midst of working a proposal to set-up a feed factory in Malaysia. The feed is a biomass base. We are looking for machines to produce feed for cattle, chicken and aquaculture fish. Production output for the first six months - 30,000 tonnes and the output increase up to 90,000 tonnes per month by year 2. Please communicate with me via email for further info. Thank you.
  • kumaran said on May 23, 2013
    I am Kumaran from Salem, Tamilnadu, I would like to start animal feed business, please help me in this regard. you can reach me at +918892505041, mail : thirukumaran81@rediffmail.com
  • Matla said on May 31, 2013
    Hi, i'm currently running a small poultry farm but i would like to expand and incorporate sheep, goats and livestock production, but i would like to produce my own feed, pls help me with information concerning the type of Milling Production Equipments, Feed Production Process, Feed Formulation, Feed Ingredients Measurements. Thanks bye, Matla, 0735997551 Springs, Gauteng South Africa
  • Johnstone Mukumbwa said on June 5, 2013
    I am Looking suppliers of the Equipment - Medium scale.
  • Hanain said on June 5, 2013
    I am interested to purchase & sale the veterinary medicine/drug namely SOLINIC LIQUID. Who will issue the license in Delhi.
  • Kwality Agro Industries said on June 7, 2013
    Sir, we want to export our product "poultry feed supplement" (this is made from the waste of slaughtered animal Bones & Meat by rendering plant) from India to Bangladesh. Will you please inform us about the export of such product as what type of documents will be required to clear the consignment at India/Bangladesh Border. Thanks
  • khalil karloo said on June 15, 2013
    hi sir, i want to manufacturing and supply of animal feed firm multan pakistan. Dear sir, I am very grateful to find this site here. Please help me on any requirements and other necessities that needs to be done. I would like to start a small scale animal feed manufacturing industry in multan pakistan, Can you Please guide me and what will be the initial investment to running the business.
  • Abubakar Musa said on June 18, 2013
    Dear Sir, Kindly assist me with all information required to establish a poultry and large and small ruminants feed mill in Kano, Northern Nigeria. Regards
  • Liladhar Patil said on June 22, 2013
    Very good day sir! I would like to start cattle feed manufacturing unit at small scale level & it would be extended as per market demand please let me know how to proceed. Thank you.
    Address: 19, Laxminagar Faizpur
    Tal; Yawal Dist;Jalgaon, Maharashtra (India)
  • Vijay Kumar said on June 23, 2013
    Dear sir I want to start small scale feed processing unit kindly help me to start, I am from karnataka , Bellary dist , Hospet
  • raj said on July 4, 2013
    i want to set up small cattle or poultry feed manufacturing unit from maiza low budget
  • Elias R. Hiyoveni said on July 7, 2013
    I would like to set up a small scale livestock feeds mixing business using local ingredients at Rakops, Botswana. I need funding for this. Please help me with a sound business plan template for this.
  • francis oluwafemi said on July 7, 2013
    business location is Calabar, in Cross River State of Nigeria. i am writing a business plan on starting up a poultry feed mill. i need help in making the list of equipment i will need to set up a medium mill factory.
  • Eze said on July 9, 2013
    I am interested in setting up a small animal feed processing plant in Nigeria. I need guide regarding equipment procurement and other details. Thanks
  • nishant gupta said on July 12, 2013
    dear sir, i just want know what are the basic raw materials that are required to process a chicken feeding plant in india and what investment are required to process a manufacturing unit
  • Prashant jain said on July 13, 2013
    sir, i want to establish a feed making plant for cattle and poultry. So please tell me the proper process, machines required, cost of project, power needed, area required and the raw material which are easily available and needed for making feed.. i am from varanasi. Thank you
  • Athishanonth said on July 18, 2013
    Dear sir, I would like to start the agent business about vitamin in poultry .Please guide me about company of vitamin to running my business. Best Regards, Athishanonth
  • Hareesh K V said on July 19, 2013
    We are providing total consultancy for setting up of cattle feed unit and poultry feed unit. Please reach us through hareeshkv@kitco.in
  • Jag Rawat said on July 20, 2013
    Haryana Livestock Primary Producers' Company Pvt Ltd is being promoted in Hisar by state veterinary university. A business plan is needed for high yielding buffaloes of Murrah breed. We need business plan as well as a consultant who can advice.
  • SANDIP G PATEL said on July 22, 2013
    I want to establish a cattle-feed products manufacturer plan so please help me tu put up a plant. i have a plot for established my plant in shokhda GIDC near khambhat in anand in gujrat. pls give information about machinery for in and other documentary for it.
  • TEBO said on July 29, 2013
    Hi! i would like to grow Lablab purpureus make it hay the bale it, please help in the input necessary from starting of ploughing to harvesting it. i am in northern part of Botswana
  • Rajkumar Singh said on July 31, 2013
    I am interested in sourcing small animal feed processing, pelleting equipment primarily for research and development. Can you offer some sources / options etc. With thanks, respectfully.
  • Ejike daniel said on August 2, 2013
    Hello please i want to start manufacturing of poultry feed as well as hatching of eggs in Anambra state of Nigeria. please link me where i can buy poultry manufacturing plants and incubators any where in Nigeria and their prices my phone +2347030362317
  • ramesh babu said on August 6, 2013
    i want to start feeds & feed supplements in bllary karnataka for cattle, where will i get license for manufacturing above. Thanks & regards
  • Sanjay Kumar said on August 20, 2013
    Dear sir, I am very grateful to find this site here. i would like to set up my own small unit for poultry feed manufacturing in "Gorakhpur"(UP). kindly help me out regarding registration and licensing as i dont have any idea rather. Please guide me how i should begin and what manufacturing machine, will be appropriate besides, what are the legal process required for setting up such unit.. Looking for an early reply. regards
  • wajeed khan said on August 25, 2013
    We have chicken boiler farm in Bidar Karnataka state, due to boiler chicken rate in the market unstability we are trying to manufacture our own feed to control our overall production cost. Please suggest appropriate machines with respect to this query
  • Ambrose Abiodun said on August 27, 2013
    Dear sir, I have a poultry farm and fish ponds located in Nigeria, Ondo state I wish to set up my own small-scale feed meal manufacturing poultry feed and fish meal. I will highly appreciate your assisting me in where I can go for the training in India or China. Thanks
  • Amos Samuel Akpan said on September 3, 2013
    IBADAN, Oyo, Nigeria. Dear sir/ma, i want setup an Animal Feed mill, kindly assist me on feasibility studies. Kind Regards,.
  • rahul said on September 3, 2013
    sir, i want to start cattle & poultry feed manufacturing /marketing business .please provide all the details related to manufacturing/marketing. Please get me the details of fda license & other license. i reside in pune. plz sir give me all details.
  • Naran patel said on October 5, 2013
    sir i start animal feed plant in 100mt. ton per month. give me project cost
  • Gbenga Iwasepeletu said on October 8, 2013
    Sir please I want to go into poultry feeds production. Pls how much will it cost me and the type of machines I will need and every other things to be put in place.
  • nilesh bhagwat said on October 13, 2013
    dear sir, good morning, i am writing from ahmednagar district, i am already working on a project for corn processing plant. Would be highly obliged if u give me details on a feed mill like the project cost, area req. I have a agri land of 6 acres with water and road access. Please do the needful. Thx and regards, Nilesh Bhagwat, 9890025244. neel_world@yahoo.co.in
  • INDERJIT SINGH DHARIWAL said on October 16, 2013
    dear sir i have small scale animal feed industry in arusha tanzania .we produce 8 -10 tons per day i want to expand my industry please do advice how to fulfill my goals and achieve the best results. thanking you in advance inderjit singh
  • omaido ivan said on October 23, 2013
    I have trained as a para vet major in animal nutrition please am available for hire or employment and project work. contact omaidoivan@gmail.com
  • akhand said on November 5, 2013
    I would like to start manufacturing poultry feed plant in faizabad U P. pls advice me
  • Poly Emene said on November 6, 2013
    I need your help and guidelines to set up a small scale cattle and poultry feed production, and Incubators for eggs, for overseas purpose. I need estimates and manufacturers name please. Thanks, Poly.
  • Johny Ch said on November 7, 2013
    hi sir, I am entrepreneur willing to start a small poultry feed manufacturing company only for chicken feeds in my state Manipur, India. Could you please help me with the start-up information regarding require machines, raw materials, cost of the machines. I will really appreciate if you can add process info as well. Thanks, GOOD DAY
  • ndirangu said on November 8, 2013
    i would like to set up a manufacturing of animal feeds and distribution in uganda and raw materials in kenya
  • ezekiel daniel senchi said on November 11, 2013
    i am writing about a business proposal to the central bank of nigeria. and i am writing on setting up an animal feed production please help me with all the necessary information and expenses in details in setting up the company. thanks from kebbi nigeria.
  • sanbrocare said on November 12, 2013
    I would like start to animal feed supplement & for this i shall need license? Madha 413209 in maharashtra
  • SAMUEL said on November 18, 2013
    I am a poultry and a dairy farmer from Nairobi, Kenya. I want to manufacture high quality feed for both the Poultry (both layers and broilers) and for dairy cows; but on small - medium scale production. Kindly guide me on the correct ingredients and their formulation for the different types of feeds required, machines required, size of land and any other resources required. Your assistance will be highly appreciated.
  • May Myo Aye said on November 23, 2013
    Dear Sir, I would like to set up an animal feed such as livestocks and chicken feed manufacturing industry in Yagon, Myanmar. Please kindly advice me
  • Tshering Wangmo said on November 25, 2013
    Hello sir, I am from Bhutan and we have a group of farmers who is doing a commercial agriculture by forming a self help group. they are planning on livestock feed production especially the cattle feed and poultry but they need a training. I shall highly appreciate if your good office could guide us where to approach for training. sincerely, Tshering Wangmo
  • hafsat abiola yusuf said on December 3, 2013
    pls i need a guide on how to write a business plan for an animal feedmill in nigeria
  • Chuks said on December 10, 2013
    I want to know the formula of the types of poultry feed and the machines I need in the production of poultry feed.Thanks.
  • Sandeep Rajput said on December 17, 2013
    We are an Animal Feed Manufacturing company, established in Uttrakhand. Distributors and Retailers are most welcome. Can contact at 9999833557.
  • Javed said on December 18, 2013
    I am seeking formula for sheep/goat feed pallet manufacturing.
  • Nebula Engineering said on December 20, 2013
    Manufacturers of Ribbon Blenders, powder blenders which are mostly used for feed manufacturing. srinebulaengineering@gmail.com. M:9900106373
  • Edward Phiri said on December 25, 2013
    Please help how I can have the information for all Feed making and the cost of the mill machine
  • ajibona olorunfemi said on January 6, 2014
    Pls sir kindly assist me with information to start up a feed mill
  • sunita padhy said on January 7, 2014
    Dear sir, I want to start cattle feeds mixing unit at Rayagada, Odisha. Plz suggest me how to start a manufacture unit.

Your Comment

(All the above fields are required.)