“Becoming a Brick Manufacturer”
Comment Page 1

  • niyas said on November 10, 2010
    I am interested to know about fly ash brick machine plant production .... to make fly ash bricks and clay brick in the manner of manual method (not in mechanical method) ... at - Kumbakonam - 612002 tanjore distric tamil nadu India. and I would like to start small (low cost) clay or machine made concrete and fly ash.if any body help start plz cnt 00919789348141
  • jyoti bhusan sarangi said on November 13, 2010
    I want to start hollow bricks projects in orissa, nearby Bhubaneswar. Please let me know how to start in a small investment. Please help me how can I get all the information i.e. project report, loan etc. Thanks
  • Mr. Kawdu S. Jaipurkar said on November 15, 2010
    Hi, I am very much interested to set up automatic brick plant, in Nagpur, Maharashtra, India. please inform me which bricks are cheaper and most required. Pl. give me details of machinery, capital and requirement for starting this business.
  • sucheta said on November 21, 2010
    I want to start cow dung brick and tiles manufacturing unit, in Mahasamund, Chhattisgarh, India. please inform me how can i start it.
  • Surendra nath mishra said on December 8, 2010
    I want to set up and start Hallow/concrete block/brick plant at Rewa M.P. India .How can I do that.
  • tommy said on December 10, 2010
    hi, i would like to start my own brick and tile manufacturing unit.please could you send me any information on how to do so
  • amiq said on December 11, 2010
    Hi, i want to start flyash brick plant in small scale so will u plz suggest me regarding this..
  • christ said on December 11, 2010
    I'm interested in setting up a brick manufacturing plant in Kuala Lumpur, Malaysia. Can you provide all details related with Cost, Machinery, Technology, Materials, and Marketing for brick making plants to me.
  • Pardeep Chopra said on December 15, 2010
    I am interested in concrete hollow brick making unit in Baddi/ nalagarh in Himachal pradesh India pls send me the project report and suggest some consultant for setting up this project. Thanks & Regards
  • dev said on December 15, 2010
    i am interested to establish a fly ash brick plant in Balasore-(orissa-india)....can u pls provide me the all aspect project on this. Thnx in advance.
  • jack said on December 16, 2010
    I am interested in doing brick project in Tamil nadu, india. I would appreciate all your guidelines or joint venture. Thanks. Jack
  • Raja Reddy said on December 16, 2010
    Hi, In order to start the clay brick plant in India, what are the rules and regulations need to be satisfied.
  • Indiamillers said on December 19, 2010
    Attention: JM Bates (Ghana) and Nelly (DR Congo). Hi, We are a india based project consultants in Brick Manufacture for SME (Small Medium Entrepreneurs)from scratch. We provide complete business solutions for anyone. Currently we are in West Africa (Ghana). You may reach me at "anand@indiamillers.com". We will get back to you. If you want to reach on Mobile call +233-2354767. Lets get starting.
  • hemant bansal said on December 21, 2010
    I am interested in concrete hollow brick making unit in bharatpur (rajasthan) India. pls send me the project report and suggest some consultant for setting up this project. Thanks & Regards
  • Carlos F. Sanchez said on December 24, 2010
    I am interested in opening a brick manufacturing plant in Paraguay, South America. I owned about 22 acres of clay soil. I am in the US, but I want to do something else.
  • Sanket kumar Das said on January 1, 2011
    want to start up a concrete hollow brick unit at Bhubaneswar-Khurda highway in Orissa. Pl guide me regarding the project cost and break-even point.
  • sk ahmed said on January 6, 2011
    Hi, I am from Kolkata (India ) and I am in real estate business, I am very much interested to set up a automatic fly ash brick plant.Plz give me the details of machinery and capitals required for starting this business. Regards,nasim
  • satish jadhav said on January 12, 2011
    we want to start our ash bricks production at raipur c.g please help us from where we will get the ash & where to sell it.location is at Raipur C.G thanks.
  • HARISH VASISTA said on January 12, 2011
    Dear sir, I am interested to start "FULLY AUTOMATIC MUD BRICKS MANUFACTURING INDUSTRY" in KARNATAKA .Please give the total project cost and any subsidy from the government.
  • Usha said on January 29, 2011
    want to set up a clay brick kiln in Madhubani district of Bihar on my own land. Have experience of over 7 years in this field. I need financial support for start up and working capital finance. Bankers want Project Report for it. Will somebody guide me on how to prepare the project Report for the Clay brick kiln in Bihar- India.
  • Elavarasan said on January 29, 2011
    I am elavarasan from bangalore,India. I am planing to start Brick Business. What about future of this? we are planning to make big Brand. Because we are new to business but i have good source like land, marketing,Moreover i need to get any approval from government? kindly let me sir. My No 9945452201
  • prabhat patodia said on January 30, 2011
    i am a resident of tezpur district of state asom in india. i am very much interested in setting up a sand brick making unit here. stone n sand is available locally .i have seen only red fired bricks used as a mass here.i need information for making bricks using automatic compact machines ,must be cost efficient to red fired bricks.pls help me by sourcing information. thanks
  • ravjeet singh said on February 8, 2011
    sir i want start my own small business of brick manufacturing please help me and any one who want invest his/her and want partnership that will also do.my no is 09326944044
  • oratile lenamile said on February 8, 2011
    i am looking for someone abroad who is interested in venturing in a brick manufacturing company.There is a high demand of building bricks and low supply here in Botswana. AFRICA, BOTSWANA, GABORONE. My no is 74481194
  • Bhagavath said on March 6, 2011
    Hi Sir, I am planning to start a Concrete Block manufacturing Business at Rajapalayam, Tamil Nadu. I have my own land on Highways just a Mile away from my town. The water test gave Ph-7.5 and we have plenty of water resource round the Year. We had a study in our town and there is a lot of demand for concrete blocks. Kindly provide us the project cost of manufacturing Blocks using Hydraulic machines and is there any Government subsidy for this business. Awaiting for your guidance. Thanks, Bhagavath.
  • narendra wadskar said on March 15, 2011
    hi i am narendra from maharashtra india, i am planning to set up clay brick manufacturing plant. can you please provide some short of business plan or checklist before we start with the business. Cheers, Narendra
  • M. Antony Magesh said on March 16, 2011
    Hi i am from tamilnadu India i along with my father planned to manufacture Red bricks, my father have already manufactured small quantity of Red bricks. I want the details of machinery available for Red brick manufacturing.
  • Raghunath expert adviser said on March 16, 2011
    @M. Antony Magesh, Hi M. Antony Magesh, There are different kinds and models of machineries available in India for manufacturing red brick. Price may vary from model to model. See the FAQ section at the top for the answer.

    Raghunath Natarajan
    Startup Biz Hub - Advisor (Staff)

  • A.Y.Dandekar said on March 16, 2011
    Fly-Ash is available nearby from thermal power station located at about 15 kms distance. I want the technical know-how to start manufacturing bricks for construction on small scale. I am located on sea shore in Kokan, Maharashtra.
  • Dibyajyoti Borah said on March 17, 2011
    Hi, I am a educated guy and want to start a small scale brick manufacturing industry in my locality. Kindly help me. I want to know the approximate costing and the process, how to start. Regards, Dibyajyoti Borah, Guwahati, Assam, India
  • TAHMID AHMED said on March 22, 2011
    Hi I am from Gazipur ,DHAKA, Bangladesh. I want to set up a auto brick factory. Please send me details of auto brick factory.
  • indrajit roy said on March 29, 2011
    I want to set up a fully automatic mud/clay brick making industries which capacity will be 8000-10000/Hr.So I need some details, like project cost, some reputed company's address, etc....Plz help.
  • SONAM GARG said on March 31, 2011
    hI I am planning to start a fly ash bricks manufacturing Business NEAR GWALIOR , MP. pLS LET ME KNOW THE PROJECT VIABILITY AND ALSO MINIMUM INVESTMENT.. PLS ALSO TELL ME ITS FUTURE IN TERMS OF PROFITABILITY IN MP / CHATTISGARH MARKET..
  • siyanda tetani said on April 5, 2011
    hello sir if you wanna buy the master range machine, at how much would it coast. i wanna start it in the eastern cape
  • Ajay said on April 7, 2011
    hI I am planning to start a fly ash bricks manufacturing Business in HP. Kindly LET ME KNOW THE PROJECT VIABILITY AND ALSO MINIMUM INVESTMENT. Also I want to set up a fully automatic mud/clay brick making industries which capacity will be 8000/ Hr.So I need some details, like project cost, some reputed company's address, etc....Plz help.
  • manoj bansal said on April 13, 2011
    please send me the detail of clay what area of punjab india is better for brick manufacturing and what should be in the clay for the best brick making
  • Milinda said on April 14, 2011
    I am interested in setting up an Ash Brickyard in Vanderbijlpark, South Africa. I need assistance regarding the business plan. I need some details about procuring raw materials, procuring machineries, suitable location, marketing strategy, market potential, financial modelling etc. Will you be able to assist? Or do you perhaps have an example of a Brickyard Business Plan which I can use. I do not know where to start. HELP!! Regards.
  • Arantxa Segurado beginner adviser said on April 19, 2011

    TALLERES FELIPE VERDES.- In some countries you can find that government finances new projects with low interest rate for loans. Also for existing project who would like to develop their factories, governments have some financial helps.

    Arantxa Segurado || asegurado@verdes.com || Brick Manufacturing Consultant

  • Arantxa Segurado beginner adviser said on April 20, 2011
    @ Milinda: If you require this information about South Africa market, you can contact Mr. Ehrenberg +27 (11) 493 6280 in Johannesburg (EHRENBERG ENGINEERING) who is fully dedicated on brick plants in this country.

    Arantxa Segurado || asegurado@verdes.com || Brick Manufacturing Consultant

  • Santosh said on April 20, 2011
    I m from hills of uttranchal i have around 2 lac to spend please let me know how can i start brick manufacturing business. please let me know does brick need some special kind of sand or can be made with all type of sand. cause i have plenty of land in hills please help me out
  • John Simson.X said on April 27, 2011
    hi, can i know a standard format for preparing quotation for supplying traditional red bricks to get orders from organizations
  • Engr. Godwin Iwuno said on May 2, 2011
    My name is Godwin Iwuno, from Onitsha in Anambra state(southern Nigeria) of Nigeria. I am looking for someone who is interested in venturing into bricks, tiles and marble production industry. There is high demand of tiles, marble and brick in Nigeria. It is only the rich that use them in building here. We have clay soil in my village in Anambra state. I can provide land for the company site. Nigeria has the largest market and one of the largest economy in africa. This is my e-mail id : iwunogodwin@gmail.com. Mobile no: +2348064197795
  • santosh kumar singh said on June 4, 2011
    hiilive in varavasi I have a land in chitranji (m.p.)which is located near thermal power plant. I would like to start a flyash brick plant kindly tell me how I can start this project as well as the total estimate of this project. My land aprx. 2 akad.
  • Pekam Umesh said on June 4, 2011
    willing to start manufacturing of fly ash bricks i had strong points like i have fly ash with my client. so whether any information about how to purchase machineries & which type?
  • Ade wale said on June 6, 2011
    I am interested to start a fully modernized brick manufacturing unit in Nigeria. Currently living in UK and am planning to relocate back as soon as possible. kindl provide the detailed information of what type of machines should be installed and which are the companies which provide the latest technology. I want minimum involvement of labour with a bulk production & a good quality. THANKS !
  • MILIND MHATRE said on June 7, 2011
    hello, i want to open the business of manufacturing mud clay bricks at PEN, RAIGAD DISTRICT, MAHARASHTRA in india. i want to get the fully knowledge about it from the starting including the project cost,cost per brick etc. i hope u will give me a favor.
  • TOLA SOLOMON said on June 7, 2011
    Please can you advice me on where to purchase locally made manual brick making and roof tiles making machines from in South Africa as i saw it is widely used in building houses.
  • Sarthak Nalawade said on June 10, 2011
    Hi,i am planning to start a RED Brick Manufacturing facility by the turn of Diwali-2011. This would be a manual facility and later aiming to convert it into automated. It would be nice if you can help me out with a Project/Business Plan of the same. Land is currently available with me. Location of the Plant: Wai, Dist.SATARA, Maharashtra, INDIA
  • soniya said on June 12, 2011
    hello, i stay in the nilgiris ooty, i want to start small scale mud brick manufacturing unit pls help me for the project report for me to avail bank loan for the same. kindly help me. soniya
  • Uma Shankar said on June 13, 2011
    I want to set up a plant for making fly ash bricks near Faridabad, Haryana. You are requested to please tell me about necessary permissions/clearances to be taken from government authorities.
  • Jatin Patel said on June 16, 2011
    Dear Sir , I m interested in latest automatic brick plant in India ,State gujrat. I have land bank of 250 Acres. Specially for bricks. I m very much interested in joint venture or separately doing this project . Pl. give Detail of this project.
  • N.Kalainesan said on June 18, 2011
    Dear sir, I am recently retired from a private concern. I want to start bricks manufacturing unit in a small level. Kindly guide me how to start and how much amount needed. Thanks a lot
  • Shathani Modongo said on June 20, 2011
    where can I find a sample plan of cement brick making plant, stock bricks and pavement bricks. Botswana, Francistown
  • Faraz khan said on June 24, 2011
    i want to start a FLY ASH brick manufacturing plant in Aurangabad Maharashtra. i want to know the future of this fly ash brick business and want your guidance to establish this plant , please give the detail of this project.
  • zakirul Hussain said on June 25, 2011
    Hi, I want to set up flyash brick industry in Nearby area of Gauhati State Assam India.may I know how to get the two ingredient like fly ash and Gypsum in gauhati Assam.it should be economically and commercially viable also.
  • Er. Milinder Kumar said on June 25, 2011
    I am interested to set up small scale concrete block factory in Uttranchal pradesh near dehradoon, Vikasnagar. Would please able to assist me? Regards, Milinder
  • Khan Saqib said on June 26, 2011
    hi, i have my business setup of bricks & blocks and for web hosting i need a good content on the same business. kindly help.. Thanks
  • kritika singh said on June 28, 2011
    hi, i'm interested in setting up a concrete brick manufacturing plant. i want to know all the necessary details required to proceed. companies to contact for these machines. cost of production and the method of production. thanks
  • Rohit Handa said on July 5, 2011
    hi i am interested in setting up a hollow,expose, and normal brick plant near delhi in a large scale. please guide me how to start and what is the future in this.
  • CMA. Sanjib Das, M.Com, AICWA, CS said on July 10, 2011
    I am a Practising Cost Accountant in Guwahati. I am interested in preparation of Project Report (DPR). For detailed preparation, as well as Bank Finance You may contact the undersigned for further development of this proposed professional relationship on sanjibd41@gmail.com/sanjibdas123@rediffmail.com Regards,
  • Amanpreet said on July 15, 2011
    I want to start business of manufacturing concrete hollow blocks in Kashmir. Kindly send me any suggestions for profit or loss of this business as soon as possible.
  • kamalsaran said on July 20, 2011
    kamal. i want to start business of concrete bricks in punjab, bathinda kindly send me any suggestions for machinery, labor , profit and loss of this business as soon as possible
  • Doubt Njagu (Mr) said on July 22, 2011
    I am a Zimbabwean currently staying in Cape Town and I intend to start a clay brick, floor and roof tile making business in Harare next year. Where can I find heavy duty machines for industrial production? If possible can you mail me price lists and information which can help me fulfill my dream.
  • Jose Maliakkal said on July 24, 2011
    Hi I am living in Thrissur dist,Kerala, state, India and intend to start a hollow brick,floor and roof tile making business in my home town by beginning of next year. I have very large land with water/electricity facilities. Where can I find relevant machines and other infrastructure. Is any one can support to start the business apart from the machines. How much will be the cost for machines and other infrastructures ? I am ready to attend any courses and visit production sites. I would appreciate if you can help me ? Also what is percentage of profit against the expenses of one/hundred bricks ?? Just an approximate Look forward to see your urgent response. Thanks and regards, Jose Maliakkal Mobile: 0091-9995 16 99 16
  • Vinay Kiran said on August 4, 2011
    Hi I am from Hyderabad.I am planning to set up a brick industry.Can you please suggest which raw material is preferable & economical.I would also like to know the cost of machines required.Can you also tell me how much does it cost approximately for the whole set up.Here is my contact# 9247797449.
  • sankar said on August 6, 2011
    Actually am a civil engineer,i would like to start a business, relative of my field, can you give some suggestion,other then construction, Tamil Nadu Trichy
  • HARSHAD BHOIR said on August 7, 2011
    HI i am harshad live in thana city, near mumbai. in india. i want to start my own brick factory. so pleas give me details of all type of bricks which i made in factory. space required for project and cost of machine. and also total cost of my project.and give me information that can i make bricks with already wet soil. thank you.
  • JAYANTI TANK said on August 7, 2011
    Sir, I am an Engr having 20 yrs experience for manufacturing concrete precast block, like hollow block solid block and concrete paver block ,We want to start production at Canada. Africa
  • ashok bera said on August 9, 2011
    gondal, Gujarat, India. I am interested in putting up a small red brick making plant in gujarat. Could you please provide me with project details such as equipment, capital, etc. Thanks and Regards, Ashok bera
  • hafiz beginner adviser said on August 13, 2011

    @seekinvestor2007@yahoo.com, in bangladesh any feasibility study, against remuneration (incl. auto brick manufacturing). further hafiz 88-01710962792 or seekinvestor2007@yahoo.com . also assist to get loan / investment from overseas lender/investor against low interest rate. already established group of companies may as for further proceedings, those have capability to arrange BG or equity. regards,

    88-02-7176307, seekinvestor2007@yahoo.com

  • riss said on August 15, 2011
    already have plot and looking for person interested in partnership with me to establish this brick manufacturing company in Ghana west Africa. my contact is 917 405 5200 currently living in NewYork United state of America
  • Nobubele said on August 15, 2011
    I am Nobubele living in Port Elizabeth in South Africa.I want to know how much cost I need to start a brick company.I also want to know the things I will need and approximation of all the cost and what type of bricks is pref arable. I also need any advise in terms of planning. Thanks
  • gbogbo yada said on August 15, 2011
    i want to start up a block/brick manufacturing business Edo State(Benin City) in Nigeria. i need you to furnish me with how much it will cost me to start up, i also want to know all the materials required for manual block/brick manufacturing,and any other critical information on blocks/bricks production. thank you.
  • Rana said on August 16, 2011
    Hi, I have decided to start brick manufacturing business in Bangladesh. I have a land beside a river but how & where to start as well as where to buy machinery, I need your help. pls.
  • jagadesh said on August 16, 2011
    I am from bangalore,India. I am planing to start cement hollow Brick Business. What about future of this? Because we are new to business but i have good source like land,near to bangalore. Moreover i need to get any approval from government? kindly let me sir.
  • Ajay Meher said on August 22, 2011
    Dear Sir, Could you please help me with a project report on fly ash brick manufacturing process. Also can you please let me know if any business classes are conducted in INDIA for fly ash brick manufacturing business. Regards, Ajay Meher THANE - INDIA
  • Fredrick said on August 22, 2011
    Am 24yrs old who lives in kenya. I want to start a concrete brick making in kenya. So i want assistance with the prices of both manual and automatic machines for making bricks. Please forward them for me through my email (otydifre@yahoo.com
  • Manoj Dandiya said on August 23, 2011
    HI, In my native place there are lot of TPP from which Fly ash is generated but same is taken away by Cement manufacturing people. But there is lot of Bad ash generated which is available for free. Kindly recommend if i can use this for brick making.
  • Tesfom said on August 23, 2011
    HI,i need to start up clay brick manufacturing in kenya, and i need your idea about how to start and how and where i can get the machine if i can get in u.k. kind regards, tesfom. thanks for ur help
  • HENRY said on August 28, 2011
    AM GRADUATE OF CERAMICS AND SPECIALIZED IN STRUCTURAL CERAMICS WHICH INCLUDES PRODUCTION OF CLAY BRICKS ETC AM WILLING TO WORK WITH ANY ONE INTERESTED IN THE PRODUCTION OF CLAYBRICKS KINDLY RECOMMEND ME TO ANY ONE WANTING TO START BRICK PRODUCTION CONTACT +233243132223
  • Ritu Raj Khaund said on August 28, 2011
    Hi All I am from Assam Located Part of North east.well i have land and man power in Assam.Dist Golaghat and Guwhati.Could you please suggest me about Flay ash brick give me details of all type of bricks which are made in factory. space required for project and cost of machine. and also total cost of my project.I am planing to setup End of this year After monsoon. thank you. Please contact me-Mobile-8800477286 Land line-01140513621
  • R D nalamwar said on August 29, 2011
    Nagpur Maharashtra India pl give me project report of manufacturing of fly ash bricks of capacity one lac bricks per day totally automatic plant and also suggest is there available for purchase old one to three year plant machinery of automatic machinery of fly ash bricks of capacity one lac bricks per day
  • Nur Ahmad Shiblee said on September 1, 2011
    I have taken a project of feasibility study of ceramic brick manufacturing for a company. Lot of studies are underway. If u have any information on the issue plz forward or contact in ph: 01730082171.
  • sunny said on September 3, 2011
    I want to start up with FLY ASH BRICK manufacturing. Is it profitable so far. Bhadrak, Orissa. please let me know. thanks.
  • Akingbade Michael said on September 5, 2011
    I reside in Ekiti,South West , Nigeria. In a town with abundant deposit of red clay, Could you please help me with information regarding establishing a brick manufacturing plant in Ekiti. I am interested in putting up a small red brick making plant in Ekiti. Could you please provide me with project details such as equipment, capital, etc. Thanks and Best Regards, Michael
  • Fortunate Bitamazire said on September 11, 2011
    Hello, I make extruded solid clay bricks in Uganda. I would like to make hollow bricks and ventilators but i lack knowledge of attaching a vacuum pump to my extruder so that i can make hollow bricks and ventilators. Let me know if there is anyone with expertise in the same to contact me on 256-712-808114 or email bfortunate@yahoo.com
  • Harsh Khator said on September 13, 2011
    Hi All I am from kolkata. well i want to start a plant of flyash machine in talchar. Could you please suggest me about Flay ash brick give me details of all type of bricks which are made in factory. space required for project and cost of machine. and also total cost of my project. thank you. Please contact me-Mobile-9978830035
  • rirhandzu maluleke said on September 13, 2011
    what type of inventory planning and control are you using? how does the company manage improvement of its business? what is the operation challenge?
  • Jyoti Varma said on September 15, 2011
    I am from Gujarat.I want to start cement brick manufacturing,can anyone pls guide me with the raw materials required and the exact proportion of it.Pls contact me @ kanishksteeltraders@gmail.com
  • deepak pathak said on September 26, 2011
    I am from baroda in gujarat and having full knowledge of manufacturing of brick through chimney if any one want to do partnership plz contact me on- 91 9909344888
  • C Lau said on September 26, 2011
    dear sir, i'm from malaysia and is interested in starting a fly ash brick small business in malaysia, any info about raw mat. and machine required will be a great help. TQ,
  • Tumaini Francis said on October 10, 2011
    I want to start a small fired bricks business in Tanzania. Is there any way you can assist me plan for this. Which are the best machines?
  • Saran Hora said on October 11, 2011
    I am planning to start Fly Ash Bricks plant, please help me out to draw lay out plan and if you can help me out with some real stats and data( investment, working capital, land requirement Break even point n blah, blah, blah.....)n most importantly what are the legal formalities and licenses required. Location : in a circle of 100 Km from Raipur, Chhattisgarh, India
  • Rae Manc said on October 12, 2011
    I am looking for a company to manufacture and export small Roman ovens made of refractory cement to the United States. I want to partner with a company that will work with me on perfecting my prototype and gearing up full production. email me at rmancheste@aol.com
  • Harsha said on October 14, 2011
    I want to start concrete Brick Manufacturing plant in Bangalore, Karnataka. Please help me from where i have to get license for unit and will be importing the plant, so i need from where i have to get clearance from the concerned authorities. If anyone knows about please mail me @ harsha.sirupa@gmail.com. Thank you
  • Lin said on October 16, 2011
    Hi, can people import bricks from China to NZ? Do you have any advice on this? I have got a family friend who has got a manufacturing factory in China. Making Eco-friendly bricks. And I am keen to know if it is a good strategy for the company to make a good future by exporting overseas?
  • suman kumar said on October 21, 2011
    Hyderabad, India. I want to start a brick manufacturing business using granite stone powder. I would like to know the manufacturing process, machines required, cost and license require.
  • nina miao said on October 21, 2011
    More details. If you get the land, and want to built a brick making plant, i mean the modern automatic brick making production line with high output, the first thing to do is, doing the raw material testing report to know its physical and chemical performance, but the raw material should be available in large, it can be clay, shale, flyash, coal gangue. Then technical design will go to the site for visiting and give a construction technical flow. You can start to the ground built. The machine choose will be following with the raw material testing report, as if your raw material is not good enough, in the process of raw material handling, more machine should be added, after box feeder, crusher, extruder, cutter, wet bricks will be loaded on dry cars, are transported to the dry chamber for drying, after 32 hours or more, it will be transported to the kiln for firing. Then the loading and unloading system will finish the fired brick to the stock yard. It is a technical to assure of the bricks not crack in drying and burning, and full automatic line. Shuangyashan Oriental Wall Material Group is specialized in brick production line, can supply the turn-key project, we have the professional terms to give you the best service from the staring to the bricks produced finally. Welcome come to visit our factory and technical discussion. email: sysdf@sysdf.com
  • mayank sharma said on October 25, 2011
    hello sir,myself MAYANK SHARMA ,from Raipur,Chhattisgarh! sir i m 22 years old,n i m student of BE final year(Elec & Eletrnx),i want to start a fly ash bricks manufacturing plant,i have land,sir can u pls tell me what actually required for this project i,e, setup cost,machines,n very imp is can u pls send me any project report or paper presentation for that particular,and all required things......
  • khursheed khan said on October 26, 2011
    Sir/Madam, There i would like to start a mud brick manufacturing plant in utter pradesh , (India) i need a comprehensive business plan so please give me ideas about how to start.kind regard.

Your Comment

(All the above fields are required.)