“Starting Steel Mini Mill”
Comment Page 2

  • Amit Jain said on November 21, 2011
    Hi All, I want to open iron and steel plant in Bhopal madhya pradesh preparing business plan so inviting the experienced persons who are interested in joining me as financial partner and also required persons who are having knowledge in this field. contact if interested 09300158858.
  • ketan patel said on November 26, 2011
    Hello all, i'm basically in Gujarat and i want to start steel plant like furnace .this project need 5 cr any body interested for this project .i have experience of steel plant and how to manage and labor work and purchase and sales all things i know very well but i have problem only for money because of i need partner for this plant please contact me royalsteelscrap@gmail.com
  • Rakesh Kumar Anand said on December 4, 2011
    I want to start a mini steel plant in Jharkhand, India and i want to know how much cost required for it.
  • Rajendra said on December 5, 2011
    I would like to start steel mill in Nagpur. Please guide me as to how much minimum investment is needed to start the enterprise.
  • rohit mathur said on December 6, 2011
    hi i want to establish a small TMT manufacturing plant at Gwalior (MP). please let me now the financials of the project so that i will move further.
  • pervez akhtar said on December 9, 2011
    If we want to setup a medium type of steel mill in Lahore Punjab Pakistan what steps would be required and what be approximate estimate for such venture thanks
  • abhilash chandra beginner adviser said on December 11, 2011
    anyone who wants to set up, modernise, or rewamp steel rolling mills or steel melting units can approach us. we are a group of young and experienced engineers who are keen to deliver our knowledge and hard work to the industry.

    Ph: 09994787782
    lakshmiconsultancy2010@gmail.com
    Steel Mill Consultant

  • saurabh goyal beginner adviser said on December 12, 2011
    DEAR MR Shrikant Pandit FIRST OF ALL GIVE DETAILS WHAT TYPE OF STEEL MATERIAL YOU WANT TO MANUFACTURE AND DAILY PRODUCTION. THEN WE WILL PROVIDE ALL DETAILS

    Ph: +91-9815923556.
    saurabhgoyal76@gmail.com
    Steel Manufacturing Consultant

  • Rana Mubashar Nadeem said on December 14, 2011
    I am Employ in FWO as a Quantity Surveyor, Rawalpindi, Pakistan. I have required to construction Cost / Feasibility report of Steel Mill here in Rawalpindi, Pakistan. Kindly give me data or any construction drawings/ BOQ regarding steel mills. Best Wishes, Rana Mubashar Nadeem
  • ramzi said on December 18, 2011
    hi, requested details including emails regarding cost of production line for recycling metal scrap on turn key basis in africa. ramzinofal@yahoo.com
  • Anuj said on December 18, 2011
    Interested in Mini rolling mill of 5000-10000 tons/annum capacity. location Ajmer, Rajasthan. Kindly forward the detailed project plan, land area requirement etc.
  • patrickjose beginner adviser said on December 26, 2011
    hii all !!! sorry for telling you the wrong info ... if u want to set up a steel plant u require atleast $10 million - $15 million ... if u have then pls do because u can get the money u invested for the steel plant in 1 year of production and then u will get the profit ..!! thnx pls contact me who wants to set up and who seriously want to !!! contact @ : patrickjosepj@gmail.com

    patrickjosepj@gmail.com

  • jailani said on December 27, 2011
    hi todays more steel rolling mill 1st get the experience to somebody else about sizes and how to take a production and for this business want boldness because you want to spirit the money and pick it and mainly steel should be a credit market approx mini mill 3to4c
  • RAJ MANI TRIPATHI said on December 31, 2011
    I am Employed in Goldcity Enterprises Ltd.,Lucknow (U.P.). I have required to construction Cost / Feasibility report of a Middle Level Steel Mill here in Barabanki or Faizabad Dist. Kindly give me data or Complete Project Report regarding steel mills. Regards. Raj Mani Tripathi
  • saurabh goyal beginner adviser said on January 1, 2012
    DEAR SIR FIRST OF ALL GIVE DETAILS WHAT TYPE OF STEEL MATERIAL YOU WANT TO MANUFACTURE AND DAILY PRODUCTION. THEN WE WILL PROVIDE ALL DETAILS, THESE ARE THE VALUED CUSTOMERS IN NEAR BARABANKI. DURGA STEEL ROLLING MILLS,LUCKNOW, (PARSHOTAM ARORA)

    Ph: +91-9815923556.
    saurabhgoyal76@gmail.com
    Steel Manufacturing Consultant

  • HASHIR ZAID.C said on January 1, 2012
    First of all I'm studying mechanical engineering ....my ambition to start up a new steel production company..... Using simple machinery at cheap cost ..... I'm really interested in steel manufacturing field because my grand father Is a great business man in IRON & STEEL ..... Already he had a mill but due to some partners problem he dropped that company but I want to open a new company that my ambition and my life aim to make that company success ... So kindly help me by giving good ideas......,!
  • abhilash chandra beginner adviser said on January 3, 2012
    a steel rolling mill for sale in karnata. 3 yrs old . excellent condition. isi certified. 140 mt/day. expandable. plenty of land. pl contact 09994787782

    Ph: 09994787782
    lakshmiconsultancy2010@gmail.com
    Steel Mill Consultant

  • Chandrakant Dighe said on January 8, 2012
    i am looking to start TMT Bar mill in Ahmednagar dist of maharashtra india . i like to have rough estimation. how much cost is needed to start mill.
  • govind said on January 11, 2012
    we are an ms ingot manufacturer based in Madurai tamilnadu, i am looking for a list of suppliers of HMS 1 &2 and buyers for MS INGOT. Since we are facing 4 hours power cut our production capacity is only 1400 tonnes /month and to break even we need 1500 tonne/month. need your advice to run profitably
  • Sandra said on January 12, 2012
    Hi, we are based in Southern Africa and will be starting an Iron Ore Refinery in the near future. Could any assist me with the manpower side of things. who/how many ect.. Also I see many of you are suppliers of the machinery needed. Please email me info/brochures to nrmtransport@mweb.co.za Many Thanks Sandra
  • M.Sheikh999 said on January 15, 2012
    I'm looking for deform bar mill with 250 ton daily capacity Pls send me quotation for same
  • sushil kumar acharya said on January 18, 2012
    hi to whom may concern ever i will clear your query about steel mill; setup production planning &plant and machinery and vender pl. contact to me 9960670332
  • Mohammed Ismail said on January 19, 2012
    Dear Sir, We are in construction business from more than 5 dachas we also have our own concrete plants, block plants, tile plants in different city of Saudi Arabia. Now we want to start our new steel plant in Saudi Arabia so we want to tie-up with any Indian company to start a steel manufacturing plants we will invest the capital. As we are new in the steel business we need an guideline to set up a steel plant. Please help me in finding the good companies from India who are interested in starting the business in Saudi Arabia. regards Mohammed Ismail, Secretary AL-ARMAK COMPANY, +966 580 775 433
  • Vicente Martín said on January 19, 2012
    Hi to whom may concern. We are a WEEE recycling plant in Canary Islands, Spain. From our process we are getting large amounts of steel scrap (both in bales and in shavings) and we are looking for mini mills which may be interested. Please, feel free to ask for further information and photos in vmartin@ewaste.es Thanks a lot.
  • Dinesh Jethi said on January 20, 2012
    We would like to have a 16" Rolling Mill in running condition at our raipur Plant. Dinesh, 9872966734 0161-5014512, 14, 15
  • Wayne Hine said on January 20, 2012
    If anyone is starting a Steel Tube mill and needs Induction Welders, do not hesitate to contact me, We can supply, support and service internationally and our HF Welders are recognized as the best, reliable, quality. Thermatool has a unit for start up with the ongoing support as your business grows
  • dr sushil kumar vijayvergia said on January 21, 2012
    I want purchase a good old steel plant in reasonable prices in south africa please send details
  • mpapahn said on January 23, 2012
    Hi every one. I'm steel mill specialist for engineering, procurement and construction projects.I'd be happy to help new investors in this section.I'm already involved in 3 steel plant projects as consultant. my email contact is mpapahn@gmail.com
  • Syed Mustafa Ali said on January 23, 2012
    We are based in Saudi Arabia and looking for the companies interested to manufacture steel TMT bars and steel products in Saudi Arabia as a joint venture 50%/ 50% equal investments where there is a huge potentiality. If interested then communicate. Syed Mustafa Ali Mobile # 00966599331752
  • Ashok kumar S said on January 23, 2012
    Hi i am in chennai .Interested in starting a steel mill and also searching for job in the same locality for getting experience.This is a small scale industry,can approximate the construction cost .It may help me a lot {construction will be locating in tamilnadu only .around chennai or tuticorin or to the surroundings} u_shok@yahoo.co.in {this my mail id supporters can contact me}
  • hilary said on January 27, 2012
    located in lagos, nigeria, i want to know the feasibility study of setting up a steel pipe mill, its urgent please. thanks
  • avi said on January 27, 2012
    hello those who have correct information on daily steel prices in market and also scrap prices(for tmt bars) in bangalore please help me, how to get daily alerts on these changing prices. thank you..
  • m. papahn said on January 28, 2012
    Dear Ms.HILARY, I'm able to prepare steel pipe mill feasibility study but I need more information. Please contact me at mpapahn@gmail.com
  • VIRENDRA said on February 2, 2012
    we want to set up a TMT bar plant in UAE and looking for a company to tie up as a joint venture where there is a huge potentiality. If interested then mail me at vbochiwal@gmail.com
  • C.Jayavel said on February 11, 2012
    I am planning to start steel mill business in chennai. I need all the information like how to manufacture what all machine are needed and how much money we want to invest to start a mini steel mill.
  • P C Ali said on February 18, 2012
    we want to set up a TMT bar plant in UAE. We are having strong financial back ground here! We need to know the cost of factory machinery and its sets ups.
  • Mahesh said on February 21, 2012
    Looking up to Set up or buy running Rolling mill in African Region pl let me know if any body have viable proposal kediamahesh@gmail.com
  • anish agarwal said on February 24, 2012
    we want to set up a tmt bar plant in jharkhand .we need to know how to get started ,and the investment estimate and set ups.....
  • arunabh said on February 29, 2012
    hie..i want to set up rolling mill in india plz any one know the actual cost to set up the plant then contact me on my email id arunabhkr.ep@gmail.com n ma no is 7488322498...thank u...
  • Rati Kanta Pattnaik said on March 9, 2012
    cuttack, Orissa, India. please give me address of a vendor , who can guide me to start a mini steel industry by setting one induction furnace using scarp metal to produce ingot for the rolling mills. I will pay the charge. with thanks rati.
  • thameem said on March 9, 2012
    We are steel re rolling mill operators in Trichy. We are looking for Labour contractors. Please call me at 09597774842
  • pravin mukati said on March 10, 2012
    I want to start mini tmt bar mill in m.p. I want to know how much equipments are required in this plant with their price and area required for this plant......plz inform me fast.
  • Sapan s soni said on March 10, 2012
    I want start mini steel wire drawing company in gujarat so i have want how much investment of this company. I have good experiance of stainless steel wire drawing
  • anup pandey said on March 19, 2012
    I want to start a steel mini mill. I want to have rough cost estimates of the whole process. I also want to have the financial information about starting a mini mill. And how much space is required for a steel mini plant. an also which steel work should i start ,,,,, from which i get much profit in less investment, pls help me. my cell no is 9096172734
  • ketan patel said on March 19, 2012
    i have now one m s ingots plant in Gujarat ,India i want to start TMT bars rolling mill in gulf country but i need like company his interested to start rolling mill and also financial strong because fully rolling mill investment is more them 12 core Indian rupees . please contact me serious party and call me on :00919726765466
  • Syed B said on March 20, 2012
    I am looking to start a steel mill and induction furnace (ingots) in Tamilnadu chennai/pollachi. If anyone has the following used units for sale can contact me.
    1. 7MT - Induction Furnace
    2. 8"-12" Steel Re-Rolling Mill.
    Please send me your quotes/offers at the earliest
  • Maung Maung said on March 22, 2012
    I am planning to set up a mini/medium steel plant in Myanmar near Yangon. Please give me advise- the requirements "financial, and other etc. If any person interest either from India or China for joint venture, please contact me.
  • vivek said on March 25, 2012
    mr. maung myanmar is really good market. i have some details you can mail your id .i will send to you. vivekpatel1303@gmail.com 09824874732
  • A S SRIKANTHA said on April 1, 2012
    i am planning for re rolling mill 8 inch pl give some ideas in bangalore karnataka
  • ramu said on April 2, 2012
    hai, i want to set up mini rolling mill in tamilnadu.that is 9" mill enough. i need the details above mill and project cost. pls mail rpramu@yahoo.com
  • Kamlesh Prasad said on April 2, 2012
    I want to start a rolling mill in Kolkata. I have got one old rolling mill of my uncle & that has been close for last 6 years. Now i want to restart the factory. I want to have rough cost estimates of the whole process. I also want to have the financial information about starting a mini mill. I don't have any kind of experience in this business. Thanks, Regards Kamlesh
  • anurag sharma said on April 6, 2012
    i am a student of 3rd yr engg from instrumentation branch. i wanted to open a steel plant and i have some idea but no one is there to guide .i am a boy from a middle class family .so thank you for provideing such good ideas
  • durgesh rai said on April 9, 2012
    sir,i want to start my own small steel mini mill so please tell me that what will be the minimum investment cast to open this plant,and tell me also the name of most useful equipment use in this plant.
  • ABANI KUMAR DASH beginner adviser said on April 9, 2012
    @durgesh rai, an provide supply of 9 INCH COMPLETE plant - with COAL PULVISOR , TRANSFORMER , RE-HEATING FURNACE , COMPLETE ELECTRICAL EQUIPMENT , with COMPLETE WORKSHOP. = RS 1.2 CR. PRODUCTION CAPACITY ; 15,00- 20,000 MTRIC TONS PER ANNUM ,PER DAY PRODUCTION : 50-60 ton. Please mail me for details abani_1971@yahoo.co.in , 09437022209

    9437022209
    abani_1971@yahoo.co.in

  • Amzad Hussain said on April 10, 2012
    Dear All, Any body explain to me, what type of approval is required for settle a mini steel (TMT) plant. I am planing this plant for gujarat location. Like Factory act, GPCB
  • Prakash said on April 19, 2012
    Dear Sir, I want to get into the business of iron and steel trading industry in India but how to start and how to capture the market of same in the best possible time that I really don't know. I am in a need of guidance so kindly look into the subject and help me to understand the intricacies of the business quickly. Thanks & Regards, Prakash
  • nirav said on April 23, 2012
    hi, i want to open small steel mill plan in gujarat at india. i want to know that how much minimum land required and how much cost requirement to open this business
  • S.Balaji said on April 28, 2012
    I want to start New TMT Bar's company for that how much investment is required to setup. Kindly give complete details and estimation report so that i will arrange to start. Thanks & Regards, S.Balaji
  • sushil said on April 30, 2012
    i want to set up a steel furnace plant in hyderabad. can u suggest me is it the right time to set up? I HAVE my own land. please give me any professional people name &' phone no who can help me. i dont have any knowledge about this.
  • ravishankar beginner adviser said on May 3, 2012
    Mr.S.Balaji, Please mail your requirements, production capacity you are looking for, location of the prepossessed plant etc..., to ravishankar_1955@yahoo.co.in

    ravishankar_1955@yahoo.co.in || Steel Manufacturing Consultant

  • Karan said on May 4, 2012
    i am planning to set up TMT bars plant in chittoor dist. can you help me that what is the estimated project cost
  • Raj said on May 9, 2012
    how to Apply For Steel Factory licence Process, Where i can get information how to establish My own Factory, plz Someone Help me. my E-mail:-( rajashriabc@gmail.com ), If someone have any idea where I get information Then Let Me Know.
  • Siddhartha Basu beginner adviser said on May 12, 2012
    Minimum production capacity should be 1000 ton per month to get the threshold figure. Machine will cost Rs.1,00,000,000.00 Aprox Indian machines. Land and Factory construction extra. Consult a rolling mill consultant , they will take the project in turn key basis. Which incl Installation of the machines, construction of factory shed, installation of crane etc. Regards, Siddhartha Basu
  • Ashish Goel said on May 18, 2012
    I want to start mini tmt bar steel plant in u.p. . Please send all information about it & how much cost required.
  • Ramesh said on May 20, 2012
    hi i am ramesh from andhra pradesh i want to start tmt rods manufacturing and iron scrap to billets factory kindly help me to do the project work
  • Ankit Jain said on May 24, 2012
    I am a mechanical engineer, want to start a steel mill. Please suggest me the location where the resources, Man power etc is easily available. Right now i m living in Delhi.
  • Shankker kumar beginner adviser said on May 24, 2012
    @ankit jain u have asked the suggestion to set up a plant and location u have right place in karnataka to startup the business, if u need any suggestions contact me on my no:+919901942421 or mail me: shanmugham.sr.81@gmail.com

    shanmugham.sr.81@gmail.com || +919901942421 || Steel Business Consultant

  • Shankker kumar beginner adviser said on May 25, 2012
    @Karan, u want setup a plant means contact me, i am steel re-rolling mill consultant , what u expect Ur annual production give the detail , so i assist u project cost. further details contact me

    shanmugham.sr.81@gmail.com || +919901942421 || Steel Business Consultant

  • Akano babafemi Sunday said on May 27, 2012
    Am interested in having a recycling mini steel rolling plant in the northern part of Nigeria. bcos no body have seen it as opportunity to wealth creation in the north, and 80% of scrap metal are transfer to lagos for recycling, pls how do i get started, i strongly have passion for this dream, the estimate of machine i needed and i also need sponsor
  • Shankker kumar beginner adviser said on May 27, 2012
    @bushan, i have seen your blog, i am sending u a rough estimate mini 7" inches mill (expert, land and power sanction deposit), re-rolling material is scrap minimum production for 12 hours (10 to 14 tons), rough cost is 1.5cr. 14"inches roughing mill 10"inches finishing mill (expert, land and power sanction deposit), re-rolling material is billet or ingot approx for 12hours (70 to 80 tons), rough cost is 8.6cr. I have sent u rough astimate for mini mill, further details contact me.

    shanmugham.sr.81@gmail.com || +919901942421 || Steel Business Consultant

  • abhishek beginner adviser said on May 31, 2012
    @akano babafemi sunday may you mail me your company address with e-mail id for sending rolling mill details abhi4629@yahoo.co.in

    abhi4629@yahoo.co.in || Steel Mini Mill Consultant

  • Raj Goud said on June 1, 2012
    Dear Sir, I am from AP, Hyd, I am planning to start Steel Shop/Business... How much PROFIT I will get on ONE TON and how much Investment I need... Plse suggest me..
  • Nitin vaswani said on June 5, 2012
    I am planing for invest in mini steel plan in m.p. india can u suggest me a good plan or idea how to do or how to gain abcd in this area?
  • Bhuvanesh Reddy said on June 7, 2012
    I am planning to start a steel mill in bangalore and i have no idea about it. can any one of u help me in doing it.
  • ghufran mehmood said on June 10, 2012
    I am ghufran working as project manager in Oman Muscat if any one interested to setup a steel factory in Oman i will help you or if any one need any feasibility study of any country i guide him and i can do the best possible approved things from all ministries. plz email me gmehmood1@ymail.com
  • chirag jadav said on June 16, 2012
    I need to establish my own rolling mill 25TPD capacity. Location at Halol(near to vadodara, gujarat). Please give me full details.
  • satyam said on June 20, 2012
    sir. i want start a mini steel mill .so pls inform me about cost for plant (investment). and what equipment use this plant.
  • praveen kumar said on June 22, 2012
    hi i want to know the indian rules and procedure (license)to start a steel mill.AREA of plant and estimated cost of plant .THANKS
  • Mukesh Pandey said on June 25, 2012
    Hi am looking for some steel plant consultant near mumbai.
  • arun verghese beginner adviser said on June 27, 2012
    Id like to know the project costs without Land And Buildings for setting up a 100 Mt per Day ReBar Mill in India

    transactinc@yahoo.com || Import & Export Adviser

  • lokesh sharma said on July 2, 2012
    hi sir i want to set up a still procurement in jaipur i am completed my m.com. and pursuing p.g.d.m(post graduation development in management) so please help me for starting my work i am waiting for your reply
  • Shrikant Deshmukh said on July 3, 2012
    I want to install mini steel forging plant in Vidarbha. Plz give me information @ this plant.
  • charan said on July 10, 2012
    Hi, I am Charan, If any one wants to setup a Re rolling Steel Plant ,In around 50 Kms from Bangalore, Land is Available More than, 10 acres, And Even can give u the Project Report for setup the unit. contact me : +919901466605
  • William Chipula said on July 16, 2012
    I would love detailed information on setting up a steel mill plant. I live in Lusaka, Zambia.
  • KALIDOSS said on July 21, 2012
    Hi, i am working as a engineer in civil engineering department. i would like to open mini steel plant 6 mm rod at madurai in tamilnadu, i want to know about area of space and appr.cost, labour, any certification from govt.etc.
  • ashishbhai said on July 28, 2012
    i want to install a mini steel mill plant [tmt bar]at gujarat. i want to know about plant machinery installation labour etc.
  • Raj krishna said on August 2, 2012
    Hi i am raj krishna from dubai i am civil engineer i am engaging with steel business,i am planning to start a steel rolling mill in karnataka state or near thamil nadu any where suitable place give a brief idea and what is the financial investment plz
  • senthil said on August 3, 2012
    I am now working in oil & gas field (piping and structural)in aboard. now i like to start new plant in tamilnadu of related to steel manufacturing please advice me my estimate is 1 crore
  • shaym said on August 9, 2012
    i m shyam sundar from megjalaya i want to set up a rolling mill at rajasthan my home town churu district pleas tell me about capital investment for 20 mt rolling mill and energy requirement with local administerial clearance for my plant . I have already 6 lac squire feet land at national highway. my cell no 9436111126
  • kabilan said on August 10, 2012
    Hi, i am from tamilnadu, working as a SS piping and welding quality control engineer. i just planned to start a TMT rolling mill in Erode. so that i am searching a job in TMT manufacturing industries to gain some experience and at the same time to look after these set up procedures.because this project cannot be done in a blink of an eye. so i just want to know is it possible to set up a plant within 2 to 2.5 cr max. i have a land of 7 acres. so in this budget what will be my output(TMT size and quantity) per day. so all this is about to resign my job:). plz give me A ANSWER so that it help in my whole life.:):):-)mail id- gkabillan@gmail.com
  • ravishankar beginner adviser said on August 11, 2012
    Hallo. I am a steel rolling mill engineer, having about 30+ years experience in steel rolling mill line, i am looking for a financial partner to start a mini steel rolling mill near Bangalore, those who are interested may please contact me on 8050094366.

    ravishankar_1955@yahoo.co.in || Steel Manufacturing Consultant

  • Muhammad said on August 14, 2012
    @Shanmugham.sr can you please share your idea for Steel Rolling Mini mill in Saudi Arabia. Total cost etc. I shall be very thankful to you. Our production requirement is 30000 annual.
  • Muhammad said on August 14, 2012
    Greeting to All, Anybody want to share Steel Re Rolling mini mill in Saudi Arabia , feasibility study, report, cost etc. I will appreciate your help. Thank you in advance
  • ketan patel said on August 15, 2012
    hello . @chirag bhai .if u want to start rolling mill near halol .i will help u all for land to production and also sale to tmt bars if u interested for start rolling mill may be cost 5 cr per day production 140 mt and 2.5 cr 50 mt per day and 2 cr 40 ton per day .now i have one rolling mill in baroda per day capacity 30 ton .if u have any problem contact me mob. 9726765466
  • Shyam said on August 23, 2012
    Hi I want to start a small steel plant in Mysore kindly need suggestion and investment details
  • vishal said on August 24, 2012
    hi, please can anyone tell me about the making of tin factory, i want to establish a factory of making of tin which are used to packing of oils , ghee etc.
  • vijayaraj.g said on August 28, 2012
    hai i am vijay from india, tamilnadu, coimbatore. i want start the mini steel mill at coimbatore, i want to know the full details about this mill. can u ple help
  • kabilan said on August 31, 2012
    @vijayaraj...hi i'm in perundurai ..i have planned to start a mini rolling mill of REBAR in this location and i need a genuine partner to set up a plant. if are interested we can work together to set up a plant. gkabillan@gmail.com
  • avdhesh said on September 8, 2012
    hi, i am avdhesh. i want to set up a 7'' steel rolling mill in bangalore. can u please tell me how much does the total investment is required to set up a rolling mill?
  • abhilash chandra beginner adviser said on September 9, 2012
    @avdhesh, excluding land, shed and e.b. deposit, i can give you new 7" mill get erected for 2 cr. includes coal pulvariser, complete machinery, workshop, electricals mechanical erection . if interested you can contact @ 09994787782,09945792067

    Ph: 09994787782
    lakshmiconsultancy2010@gmail.com
    Steel Mill Consultant

Your Comment

(All the above fields are required.)