“Start Your Own Flour Mill”
Comment Page 3

  • Muhammad Rafiq Charakla said on August 3, 2011
    I want to setup medium size floor mill in Industrial areas of Karachi, Pakistan. Capacity apx. 50 tons pd. Need some estimations about finance required, process involved, time lines to reach commercial production and return on investment. currently I have my business in Dubai, U.A.E.
  • Amit Sharma expert adviser said on August 3, 2011
    @Sunil M, The Difference between Roller Flour Mill and Chakki Plant is that you cannot produce Maida, Refined Atta, Coarse Bran in Chakki Plant. Chakki plants are only used to produce wholewheat atta with full fibers with the same aroma of stones and taste you get from local street vendors. Rollers are used to damage the starch and extract fibers from the wheat flour. which is used in bakery products like bread, biscuits etc.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Amit Sharma expert adviser said on August 3, 2011

    @arjun, Just purchase  a single chakki from you local market , it can grind 200 Kg/Hr.  As there is no such atta plant for a small capacity of 2 ton per day, You have to setup at least 2 ton/hr chakki atta plant to get the viability.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Vishal said on August 6, 2011
    I want know about flour mill & its cost of machines price so give me detail Thanks
  • Sarbeswar Roul said on August 9, 2011
    Sir, I want to start a atta mill in orissa market. So Please give me suggestion for start atta mill. Which place i will purchase wheat. Kendra Para Orissa 754215
  • Pravas das said on August 10, 2011
    we want to set up a plant of Flour mill of capacity 250tonn/day in West Bengal,pl provide me the cost of related machines .
  • otti charles said on August 10, 2011
    i am in enugu state Nigeria. i want to start a small cowpea milling company of about 20 tons daily. i want also to be packaging it for sales. pls i want to know the cost of machines and other things involved
  • Amit Sharma expert adviser said on August 10, 2011
    @Pravas das, Cost of 250 TPD Roller Flour Mill Machinery is Rs. 2.5 Crores.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Pravas das said on August 11, 2011
    Thanks a lot,we will be very much benefited if u kindly provide me the break up cost (related machines Indian made,for fully automated plant for FLOUR MILL). WRG Pravas Food Technologist 9836091913
  • Amit Sharma expert adviser said on August 11, 2011
    @Pravas das, You can send your request to the email id given in my signature. We cannot post the cost of each and every machinery in public forum.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Durgesh Sharma said on August 12, 2011
    Hi, I am Durgesh Sharma as BE mechanical, and now to keenly interested to start own business. How you can help me and what the things I need to start the business. please guide me on by reply on durgesh_380@yahoo.co.in
  • Amit Sharma expert adviser said on August 13, 2011
    @s kulkarni, Who told you that there is shortage of wheat in india ?? This year the wheat production in india was 85930000 Metric Tonnes which is 6.5% more than last year 80800000 Metric Tonnes. And for all other queries read my previous comments.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • olga said on August 16, 2011
    Hallo I am having a small milling here in Namibia but I want to expand my milling i need the investor to invest in my milling I need to buy more equipments and to expand the milling. my flour its on demand but i have a difficult for producing more flour because lack of machinery pleas refer me to any body who want to invest Olga@gmail.com
  • RAJESH SINHA said on August 17, 2011
    wants to setup 100tpd floor mill in deoghar, jharkhand, India. Pl. provide project cost,in detail with latest technology.
  • amitraj said on August 18, 2011
    please help me ! i want to know how to start up a commercial flour mill in DHANBAD (JHARKHAND) INDIA for aata, satu, besan, dalia, maida ,suji etc
  • Amit Sharma expert adviser said on August 18, 2011
    @amitraj, To manufacture atta,maida,suji,dalia and sattu you have setup a roller flour mill for wheat processing and blending and to manufacture besan you have to setup a unit for gram dal processing. whats your desired capacity and whats your budget to start this business ?

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Ahilya Nanasaheb Sarak said on August 19, 2011
    Hi Amit Sir i want start my besan flour mill at Pune. capacity 2to 4 tons / day what will total cost and margin from this business? my email id saraknanaso@gmail.com
  • Amit Sharma expert adviser said on August 19, 2011
    First of all 2-4 Ton/day Project is not feasible, Secondly Do u want to Produce Besan from Dal or you also want to Gram and Produce Gram Dal then Besan from it ?

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Pradeep Bankhede said on August 20, 2011
    Dear Sir /Madam, I m planing to establish one commercial flour mill in my town at district lavel. I belongs to Madyapradesh (india). Before to start this project i want to know the the proper legal process (govt. approvals) and Govt. subsidized Loan etc. then market survey report and machinery etc. so that i can prepare road map for the project in efficient manner. Please let me know the complete process asap. Regards Pradeep Bankhede Mechanical Engineer
  • Latha. A said on August 22, 2011
    Dear Sir, I would like to start a medium size flour mill unit in Chennai. Request you to let me know approx how much area would be required and what will be the cost of Wheat flour, rice flour and gram flour machine. I am working in an MNC and want to start a business on my own. I donot have much knowledge on this industry. I am trying to get more knowledge on this industry on internet.Awaiting your reply, Thanks & Best Regards, Latha
  • Latha A said on August 22, 2011
    Sir, I want to start a Domestic Flour Mill and not commercial one in Chennai. The capacity will not be more than 200 kg per day. I request your advice on how much I will have to invest and machinery cost Thanks & Regards, Latha
  • Vicky said on August 22, 2011
    Dear Mr. Sharma, Information shared in this blog seems to be very helpful and practical. Your advice will be highly appreciated on the following requirement.
    1. Starting a wheat flour business in Maharashtra on small scale.
    2. Wheat will be purchased from Rajasthan and grinded in Maharashtra as part of job work.
    3. Are there any standard government procedure to be followed to starts this business or any permission required?
    4. What will be the package cost per 5kg?
  • Amit Sharma expert adviser said on August 22, 2011
    @Vicky, There are no special procedure you have to follow to start a flour mill, You just need to register your company in DIC,Sales Tax, Wheat Purchase license from Market Committee ( Mandi Samiti), NOC from Pollution and Fire Departments, CLU From Town Planner if not an industrial land.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • sunil varade said on August 22, 2011
    hi sir, we are interested in besan plant in solapur in m.s (india) we are required 300kg per hr. I request your advice on how much I will have to invest and machinery cost. with regards sunil varade
  • Amit Sharma expert adviser said on August 23, 2011
    @sunil varade, 300 kg/hr Besan Plant is not feasible because most of the machinery used in processing Gram Pulse ( Chana Dal) are having minimum capacity of 1 Ton/hour, So we suggest you to setup 1 Ton/Hr Besan Plant and The project cost is approx. Rs 40 Lakhs including Civil,Mechanical and Electrical Work.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • jaskirat singh said on August 27, 2011
    I want to know about total investment required to start a small scale as well as large scale flour mill plz mail me regarding this at :bajwajaskirat@gmail.com
  • Hussain said on August 30, 2011
    we have purchase 05. ton rice mill second hand we are improving this plz suggest me how i am going to improve 0.5 to 1 ton mill
  • Amit Sharma expert adviser said on August 31, 2011
    @ashok kumar, We dont recommend setting up a chakki atta plant with less than 2 Ton/Hour Capacity. But if you want too setup this 5-6 ton/day plant Approx. Rupees 10 lakhs are required for this . If you are interested you can send a mail to my e-mai id. we can suggest you good manufactures in faridabad.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • umesh singh said on September 1, 2011
    good morning sir! I umesh singh want to start a flour mill in chhattisgarh in raigarh city & my industry name is 'VARDAAN FLOUR MILL' of capacity 10-300 TPD. SO PLS SEND ME THE DETAILS OF NEAREST 7 CHEAPEST MACHINE MANUFACTURER'S ADDRESS & OTHER TOTAL INFORMATION REGARDING LICENSES, PACKING , SELLING & ALL. MY CONTACT NO. IS - 9098131971
  • mani said on September 3, 2011
    i want to open floor mill plz help me.....i want to open in lucknow....my no is 9506171717....7860100002.....
  • VIKASH KUMAR said on September 4, 2011
    I WANT TO START MY FLOUR MILL [NEAR LUDHIANA] BUT I DONT KNOW HOW TO START IT HOW MUCH FINANCE IS REQUIRED FOR IT ?? WHAT R THE GOVT.FACILITIES FOR It IN GORAKHPUR, UP
  • SUNDAY ADE said on September 5, 2011
    I reside in Lagos, Nigeria. Can you freely furnish me with the financial implication of establishing my own flour mill? I will sincerely appreciate your kind gestures towards realizing this dream. Your advice and other support are welcome. Thanks
  • Tushar Bhosale said on September 8, 2011
    I want to start my own flour mill(Chakki atta Plant) in CIDCO Navi Mumbai area. i want detail information of documentation and procedure of various departments for NOC and total Cost estimate Including Machines Etc.whether backward cast people get any subsidies .,Navi Mumbai, Maharashtra,India
  • adya said on September 8, 2011
    i want to open flour mill in mumbai plz tel me what is procedure to open it and what license is require for that and how it can be obtained
  • chandran pp said on September 8, 2011
    like to know the process flow chart of complete by products from raw wheat ie., wheat to maida, rava etc.,
  • manish singh said on September 9, 2011
    i want to open my own flour mill in raebareli up pls tell me whether its good location for this business or not
  • Amit Sharma expert adviser said on September 10, 2011
    @manish singh, Rai Bareily has only 4 flour mills near birla cement factory and still there is good scope of flour mill as the wheat arrival is good. we are already doing 1 project in Rai Bareily.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • manish deshmukh said on September 10, 2011
    i want to open own mini flour mill in nanded maharastra in india so ple tell me guide and price of plant
  • Linda said on September 11, 2011
    I am interesting in knowing the detail on how I can obtain skills in knowing how to operate a flour mill business in Pennsylvania. What size of a property is needed, cost to operate one and equipment needed to start a successful flour mill. Thank you kindly,
  • sawan said on September 11, 2011
    Dear Mr. Amit, I have a land of 1 acre If i would plan to start a maida flour mill plant near Pune Maharashtra, then what would be the approx cost for 2 tons machine & the compliance as per the Maharashtra rules...If you could share the market trend like the profit margin - per kg or per ton profit or in hand percentage like 20% 30% or 40% ??? so that i have a Idea ---- Regards, Sawan
  • Dr.Jaalan Ibrahim Ismail said on September 12, 2011
    Hi, I am intending to start own Flour Milling Project. I am located at the City site bordered with semi Rural Urban Location. Where people are very much busy in a way they need to be supplied with the Maize Flour in order to make them enjoy their day. I am in Dar-es-salaam City,and it is in Tanzania. Mainland. The Country remain TANZANIA. +255 752 323 222, Best Rgd. Dr. Jaalan
  • jishu said on September 13, 2011
    dear sir myself from bihar want to establish wheat flour mill. give detail instruction about this my mobile no is 9570387381
  • Anurag Agarwal said on September 15, 2011
    I want to start a 20 tpd flour mill in my city kishangarh, ajmer, Rajasthan. so i would like to know what all machinery & equipments needed for it. what will be the cost of those machinery. Who is the supplier and Manufacturer.....area needed for plant & go-down. what will be the total expenditure for it. Anurag Agarwal 9214337133
  • amar kumar said on September 20, 2011
    amar kumar, meer gulabi bagh, sadargali, khajekallan,patna city,bihar patna 800008. mob 09334418920 or 08809120505. i have a land of 15000square ft i want to start a flour mill i want to know what is the profit in percentage or kg please suggest me
  • Samir said on September 20, 2011
    I want to start a 20 tpd flour mill in Egypt for commercial use. How much capital is needed to start the project? What are the returns on the long run? Best Regards. Samir
  • saumya agrawal said on September 21, 2011
    i want to open a flour mill sagar in khuri(m.p)pls give me about all type basic information
  • sampurna nanda said on September 23, 2011
    specification and cost please provide me to establish a mini wheat and grains flour mill at rural area of dist-cuttack,orissa
  • sonu said on September 25, 2011
    india, bihar, vaishali. sir, i want to establish my own flour mill in the above listed place. please tell me in details the requirement's required to put up the mill....i want details about the machines, how to set up the mill, about cost, about it's output capacity and all the necessary details...
  • Jaydeep Khare said on September 26, 2011
    Pune , Maharastra , I want to known about latest types flour mill. Is their any type which easy to keep clean and also give good quality of flour
  • g.k.agarwal said on September 27, 2011
    sir i am running roller flour mill in rajasthan. i want to establish new plant in gujrat please guide me what its scope in gujrat and best location in gujrat. thanks
  • Amit Sharma expert adviser said on September 27, 2011
    Hundreds of people here are asking question but no one has time to read the details posted in this article. I request the Visitors to go through all the comments posted here and if you have any query which you think is not answered in the previous comments, feel free to post here. Its not easy for us to post same reply for every comment. And if you don't want to public your details like budget/location/background etc, My E-mail id is posted with each of my comment here, feel free to mail me. Thanks

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Ankur said on October 1, 2011
    Mr. Sharma, I have read your earlier posts. Please tell me that 2 TPH amounts to how much TPD as general convention for mills appears to be TPD. I wish to enter in branded Atta segment targeting middle class and lower middle class in towns like Sagar in MP. Please tell me that in current scenario as the market is already crowded with many brands, is it advisable to enter into this product range. packaging of 1Kg, 2 Kg, 5Kg and 25-50Kg is desired for home usage of flour, Please advise that we can get it done from some vendor or it is feasible to have our own packaging machinery. Kindly mail me the estimate of Capital for Setup and Working Capital requirement for a typical 100TPD & 150TPD plants.
  • raghwendra said on October 5, 2011
    sir, I am Raghwendra Agrawal from Mau dist Bhind.I want to setup a Suzi,Maida mill in my village. Please send me necessary information regarding the setup of these plant.I also want to know capacity and price of these plant.
  • Govind Shukla said on October 5, 2011
    I want to start my own fully automated flour mill plant I have land in Lucknow and want to produce my aata, maida and suji in 5 kg and 10 kg packing, i want to complete guidance from experts from beginning until production not started, and plant must have capacity of produce minimum 200 kuintal.
  • manna mishra said on October 5, 2011
    i have read your all suggestion on top of the page , but i am not satisfy with your answer, i want to know more about this .so if you want to evaluate it then i want to talk you amit ji. and please e_mail your full address .. because i want to visit... thanks..
  • Amit Sharma expert adviser said on October 6, 2011
    @manna mishra, Post your queries which you think are not answered or non-satisfactory.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • vishnu bordiya said on October 8, 2011
    respected sir, I WANT TO SETUP THE WHEAT GRADING PLANT IN MP PLZ GIVE ME THE INFORMATION ABOUT IT. THANKS, VISHNU 09826888377
  • saurabh goyal beginner adviser said on October 10, 2011
    we are the manufacturers of chilled rolls for flour mills. +91-9855220862

    Ph: +91-9815923556.
    saurabhgoyal76@gmail.com
    Steel Manufacturing Consultant

  • Rakesh Kumar Yadav said on October 11, 2011
    Rakesh kumar yadav district-Khandwa M.P. india. pls I want to start my own fully automated flour mill plant I have land in Harsud Khandwa and want to produce my aata, maida and suji in 5 kg and 10 kg packing, i want to complete guidance from experts from beginning until production not started, and plant must have capacity of produce minimum 200 kuintal.
  • rohit kumar said on October 12, 2011
    needed all kind of information related to flour mill , i just know that ministry of food processing provides a grant to start your mill but i just want to know how to start a flour mill , first to last step, u can send me quotation also.
  • lalatendu mohanty said on October 12, 2011
    boss i need ur help to start a mini rice or wheat flour mill in orissa so plz suggest me how to start i have already the infrastructure land and three phase line and also running the rice hallure but now i want to expand it so let me know the cost to expand to a mill
  • Hari pada Mondal said on October 12, 2011
    dear sir please write ,needs to set up wheat flour mill at Rishra, Hooghly,West Bengal,India,PIN-712205. I am interested to set up Mill. Send me full details of machinery including packaging, total cost and % profit etc. Thanks, Hari
  • Daven said on October 12, 2011
    Hi . can you mention to me the estimated price for starting this kind of job ? as what is the requirement of the object to start this flour mill ?
  • vikhyat said on October 14, 2011
    sir,I am Vikhyat Jain from Tikamgarh (M.P.). Sir I want to start flour mill in Tikamgarh. so please give me basic information about it. and give me detail about initial investment ?
  • Shyam Aanjne said on October 16, 2011
    I want to start my own fully automated flour mill plant in mumbai or navi mumbai. I want to produce my aata,in 5 kg and 10 kg packing, i want to complete guidance from experts from beginning until production not started, and plant must have capacity of produce minimum 20 Ton.Shyam Aanjne 8652166110
  • James Malula said on October 17, 2011
    I want to start my small sale flour mill plant in Juba, South Sudan for commercial purpose. I want to produce in packages of 2, 5, 10, and 25 kgs in bags. Please mention to me the estimated price cost for starting.
  • Murugan said on October 18, 2011
    Hi, I am interested in starting up a RICE FLOUR making mil business for my father in chenai. Please provide your valuable assistance on this. Location:- Chennai, Tamilnadu, India. Regards, Murugan
  • Prasad Masurkar said on October 20, 2011
    Hello Amit, I am interested in starting up a small shop for making a chakki setup. I need to know what type of machinery will suite my need.
    My Details: Location- Thane, Maharashtra
    Plant: Small rented gala in Residential complex to meet basic grains flour needs of residents
    Please provide me type of machine with technical details, approximate cost of machine, any Govt NOC's if required and Certificates. I will really appreciate your quick response to this query.
  • sudarshana N said on October 24, 2011
    This is sudarshana from Bangalore. We would like to start a commercial flour mill of wheat rice etc but before that i would like to know a cost to set up a flour mill about a capacity of 1 ton
  • srikanth said on October 24, 2011
    hi i haw rice mill 20 ton capacity but i am sail my protect in local arya , but i want to sell my rice bulk orders more earas any idea or orders of rice consultants boiled rice, raw rice, broken rice boiled bran, raw bran.
  • uwem patrick said on October 26, 2011
    Hi my name is uwem patrick from nigeria .pls ooo i want too start flour mill biz from small.email:prudentuwem@yahoo.com
  • Manoj Goyal said on October 28, 2011
    Hi,This is Manoj Goyal,a Business Consultant providing consultancy for Installation,Take Over of business units. Person interested in setting up or acquiring an existing unit may contact -- manoj Goyal c/o Ace Business Promoters E mail: acebp@rediffmail.com Mob. no- 9359100016, 9012730108
  • senthil kumar.d said on November 2, 2011
    dear sir, i want 20t/day roller flour mill for lease in chennai please contact by mail
  • Víctor De Anda said on November 6, 2011
    Hi...I just have started up a flour milling (whole wheat flour) using a stone mill and I would like to know what quality tests need to do to control Strength and extensibility in whole wheat flour...Alveograph method is too expensive and i'm not sure if it only applies to white refined flour or applies for both kind of flours (whole wheat and white refined flour)...also i would like to know if some other empirical method exists to measure strength and extensibility in whole wheat flour... I living in Mexicali, Mexico...thanks in advance, best regards
  • preeti said on November 8, 2011
    hey its preeti, n my dad has his own flour mill(RAVA MILL) at north karnataka. but nowerdays his business is down due to many such flour mills were opened in north india. i just wanted to know how he can develop his business. ours is an stone chakki mill.. all machines are good. we just need some innovation and proper guidance. Thank you regards preeti
  • Narendra Sabnani said on November 13, 2011
    hello sir. i am upto set a atta chakki plant at shujalpur m.p. . I want to set up an atta chakki plant in low budget but with good and advanced machines. Please guide me for this and provide me details regarding machines. Thank You J.M.Trading Co. , M.G. Road , near SBOI Shujalpur Mandi-465333 M.P. Mobil- 094250-35225, 098260-42225
  • Imran Bhand said on November 13, 2011
    I am interested to set up flour mill please send me details of all types of flour mills regarding estimation cost
  • kanai Lal Saha said on November 15, 2011
    Respected Sir/ Madam. I want to setup a modern flower mill in coochbehar district in West Bengal. Pls give me basic information about it. Also give me detail about investment and WB Govt. Policy like providing subsidy rate wheat etc.
  • ravi kumar said on November 17, 2011
    Dear Sir /Madam, I'm planing to establish one commercial flour mill in my town at district level. I belongs to Bihar,sitamarhi (india). Before to start this project i want to know the the proper legal process (govt. approvals) and Govt. subsidized Loan etc. please advice whole set up price. Please let me know the complete process asap. Regards Ravi Kumar
  • Shishir Gupta said on November 18, 2011
    Dear Sir/Madam. I have already set up a 6 body flour mill in Bundelkhand Uttar Pradesh. I have less funds to start the mill. So kindly assist me any subsidy procedure or working capital loan
  • Ioannis Mour said on November 18, 2011
    Greece , Giannitsa , Hi i want to ask , how can i start my own small flour mill ? What have i do for this ? Thank You
  • Janakiraman said on November 19, 2011
    Dear sir, I am interested to start distribution business of domestic products in tanzania plz guide in safe way. Thanks and waiting for your reply sir.
  • Dennisia said on November 21, 2011
    Dear Sir/Madam, please could you advise me on what machine to buy to start up a small flour mill business for 1,5 and 10kg.Also the cost of starting it.I will also want to know the proper legal process (govt. approvals) etc. please advice whole set up price. Please let me know the complete process.Thanks
  • sagar said on November 21, 2011
    Hi sir, i want to start Besan (gram) flour manufacturing plant. I have 3 to 5 acre land. so plz give me total cost of plant without land cost. plant capacity should be 2 to 6 ton/hr. Thanks
  • Suresh Patel said on November 30, 2011
    Dear sir, kindly let me know about the floor mill price , capacity and installment fee, and suggestion best machine for my village. it had been located in valsad district.
  • Arun singh said on December 1, 2011
    I wants start a besan and sattu mill capacity 8 to 10 ton per day. please suggest me how many investment is required for this and how do i sale my finished goods in market. Mob-09975446645.Email id-arunkumarsingh87@ymail.com
  • Dheeraj mishra said on December 3, 2011
    Sir i am interested in set up own flour mill and supplying own flour in market. i belong from district mirzapur uttar pradesh india. please tell me what will i have to do for this.
  • deepak chilka said on December 3, 2011
    Sir i want to start a chakki atta mill having capacity of 10 tons p/day. in solapur (maha.state). what will be the prospectus, raw material availability, demand for finished products, approx. investment etc.Pl inform.
  • naveenkumar s said on December 6, 2011
    dear sir, i want start dried turmeric business by using mechanical dryer please help me where these mechanical dryers are available for turmeric drying
  • dhanrajmiller said on December 8, 2011
    hello mr.sir arunsingh secondhand besan mill machinery cost rs 6 lakh machinery motor starter cable already fitting and plant open charge 60 thousand capacity 400 hundred p/h 60 hp my contact no 9673115902 head off balaji can wasing b 132 ring road surat 9824111931
  • Amit Sharma expert adviser said on December 9, 2011
    @rahul deshinge, I have explained everything to you during our telephonic conversation. What else you know ?

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Gaurav Sharma said on December 9, 2011
    I want to setup a flour mill of capacity 10ton/day. please provide estimate cost of machines ? Gaurav sharma, 9001295586, gauravsharma2008kota@gmail.com
  • ashish said on December 9, 2011
    sir, i want to start a small scale flour mill so i am intrusted set up own flour mill and supplying own flour in market. i belong from district gwalior madya pradesh india. please tell me what will i have to do for this.
  • NIRANJAN KUMAR beginner adviser said on December 10, 2011
    I am working in consultancy job in U.P. and while searching some information I am submitted or portfolio to this site quite interesting but what I realize most of the participants are Little bit ignorance who does not know about milling process and quality parameter just write the comment any thing to show the people own smartness please avoid that type of people and go through the proper qualified people. I just want to confirm you that the fact of Flour milling is of two types are economically or practically in practice called chakki Milling & roller flour milling.chakki milling is simple process and more than approx.10 lakh units are working across India and this mill is used for producing whole wheat Atta. Second type of called Roller Flour Milling this produces variety of products like MAIDA,Sooji,Atta, Bran and Germ. This is typical milling process and in India runing capacity for such mill is 60 - 600 T per day and this costs about 2-10.5 crores if Indian machineries are used but for Imported ones minimum runing capacity would be 100 Tons per day and it should cost any where from 6-10 crores in india. I am proud to share such type of information to satisfy the people who are interested to put a new milling unit.
    Niranjan kumar

    niranjan_singh_54@hotmail.com
    Ph: 9415263019, 8009886077
    Flour Mill Consultant

  • Ravi Waikar said on December 10, 2011
    I have own atta chakki . I have been running this chakki since 2 years now i want to increase my business i grind daily 200 kg. Where get much order
  • Amit Sharma expert adviser said on December 10, 2011
    @NIRANJAN KUMAR, Please Name the Person(s) who you think is not a qualified miller. Our Team will surely delete their comments.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Upendra chandra sarker said on December 11, 2011
    sir, i want to start a small scale flour mill so i am intrusted set up own flour mill and supplying own flour in market. i belong from district dhaka in bangladesh. please tell me detail of all types of flour mills regarding estimation cost & what will i have to do for this. please guide me.
  • v.raju said on December 11, 2011
    i want to start flour industry. in our karimngar. my plan is to supply whole andhra pradesh. so what i would like to know the machinery cost and every thing about this field. i want to enter in the market with different concept. so could you please guide me in this regard. thank you
  • NIRANJAN KUMAR beginner adviser said on December 12, 2011
    Dear Upendra ji and Raju ji, Please our request is to select the capacity which is you can sell easily in market then all parameter will be come in front of you. then we can also suggest you better. Thanks, contact 9415263019

    niranjan_singh_54@hotmail.com
    Ph: 9415263019, 8009886077
    Flour Mill Consultant

  • Pooja Kumar said on December 13, 2011
    Hi Amit, We are planning to start a 100tons/day flour mill near Lucknow, UP. Could you please advise from where we can get access to the Central Government and State Government Subsidies and also an estimated project cost for the 100TPD capacity. Regards, Pooja Kumar

Your Comment

(All the above fields are required.)