How to Operate Backhoe

In the industrial world, there are some machinery used in order to make the construction tasks lighter and hassle free. Example of the machine used in this type of work is the backhoe. Backhoe is somehow a complicated machine to use.

That is why construction workers must have an idea on how to operate backhoe.

There are certain tips that you need to learn on how to operate backhoe. The information regarding this will help you a lot in maximizing the use of this industrial particularly construction equipment.

Assess the Working Area

In order to fully use the service of a backhoe, the operator of this equipment must initially have some field plan of the place where he will perform digging activities. Particularly, you have to locate the underground cables, sewer, water pipes and gas pipes. Marking the spots where you will find these is important in order to promote not only the effectiveness of the digging task but also to establish safety of the operator. Aside from the aforementioned areas that you need to asses, you should also evaluate the location for drop-offs, obstacles and holes.

Safety Precautions before Navigating the Machine

If you will be operating a new model of backhoe which you have never tried to manipulate before, see to it that you read the information that you can find in the machine's manual. This is the best source of data that will tell you how to successfully run the machine. These machines are usually huge up to the point that the operator cannot reach the mounting parts of the backhoe. So, when you are about to operate this, you have to secure a ladder and handrails prior to the manipulation of the backhoe. This is not only intended for easy manipulation of the equipment but also for the safety of the operator. When speaking of the safety measures, once the operator is already seated inside the backhoe, you have to fasten your seatbelt. Furthermore, you also need to have the brake set and place it in the neutral position.

Start Digging

If all the safety measures are already set and done, you must start now the machine of the backhoe. In starting the machine, make sure that you have maintained the loader bucket facing downward to the ground. Run the machine until you have reached the place where you will perform some digging. As you start your digging activity, always manipulate the machine from the seat.

How to Lift and to Park the Equipment

When you fill the loading bucket, see to it that you follow the instructions of the manufacturer. When loading the weights in the loading bucket, make sure that you will lift it over the machine's back and not over the sides. When you are working on slopes, make sure that the bucket will be dumped uphill. By the time that you are already done with your task, park the backhoe in flat ground. Before getting off the backhoe, ensure that you have turned it off and you have set the machine in the neutral state.


    (All the above fields are required.)