“Start Your Own Flour Mill”
Comment Page 4

  • Amit Sharma expert adviser said on December 13, 2011
    @Pooja Kumar, Project Cost is already posted me several times in this blog, So i request you to through it. And if you are seriously interested in Setting Up the plant you can mail me at my e-mail id given below, For Project Setup & Subsidy Process.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Amit Sharma expert adviser said on December 13, 2011

    @Pooja Kumar, Project Cost is already posted by me several times in this blog, So i request you to go through it. And if you are seriously interested in Setting Up the plant you can mail me at my e-mail id given below, For Project Setup & Subsidy Process.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Srinivas Dixit said on December 14, 2011
    We are working on Biscuit plant capacity 10 tonnes per day. can you give us the details of raw materials provider
  • NIRANJAN KUMAR beginner adviser said on December 16, 2011
    pooja kumar ji, the project cost are minimum 2.5 crore and regarding subsidy please contact to us on our mail id.

    niranjan_singh_54@hotmail.com
    Ph: 9415263019, 8009886077
    Flour Mill Consultant

  • Mahendra said on December 17, 2011
    I want to start flour mill. What quantity of wheat is required to get 1 ton of wheat? what should be the cost to establish medium size plant.
  • rmaheswari said on December 18, 2011
    30tpd flour mill proposing to set up in bikaner rajasthan please provide feasibility cum project report
  • raj said on December 18, 2011
    i want to start rolling flour mill in Purulia, west bengal with 20 ton capacity per day. what may be the area and finance required.
  • NIRANJAN KUMAR beginner adviser said on December 20, 2011
    Mr. raj , purulia is a good side for flour mill but your capacity to low ,you go through minimum 80 ton per day cap.in flour mill and other wise you can go chakki fresh atta on itc based. for detail contact to us, through mail or mobile no. Thanks

    niranjan_singh_54@hotmail.com
    Ph: 9415263019, 8009886077
    Flour Mill Consultant

  • mujahid said on December 21, 2011
    I want to import flour from pakistan and sell in Dubai. only containers. is it a good business. what are the pitfalls
  • NIRANJAN KUMAR beginner adviser said on December 22, 2011
    Dear rajendra ji, if you have land and money then you will start the mill. nothing is impossible. detail contact us.

    niranjan_singh_54@hotmail.com
    Ph: 9415263019, 8009886077
    Flour Mill Consultant

  • NIRANJAN KUMAR beginner adviser said on December 24, 2011
    In pakistan i dont know what is technical aspects. in india define in capacity and quality of plant. please confirm to us in capacity of plant and what quality in market demand.

    niranjan_singh_54@hotmail.com
    Ph: 9415263019, 8009886077
    Flour Mill Consultant

  • dhanraj miller beginner adviser said on December 27, 2011
    besan mill sell motor 60hp starter cable newmaticik fan airlock 2no micro puloliser centidfigal 450 kg capacity p/h cost 4.5 lakhs

    +919977583005 || Flour Mill Consultant

  • Dmytro said on December 30, 2011
    I am looking for a partner to reopen a flour mill factory in Ukraine. 80 mt/day. +380673387676
  • sri santhi shanmukha industries said on January 3, 2012
    dear sir, i am looking out set up besan making plant in andhrapradesh cap 1500 tons per annum. pls suggest me it is suitable or not ,if yes suggest with project and market potential.
  • Amit Sharma expert adviser said on January 5, 2012
    @DINESH KUMAR TRIVEDI, You can send me your proposal at my e-mail id given below.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • sameer kuduple said on January 12, 2012
    i want to start a micro or small scale flour mill so i am interested to set up own flour mill and supplying flour in market in bulk. i belongs to Nagpur in maharashtra,INDIA. please tell me detail of all types of flour mills regarding estimation cost & what will i have to do for this. kindly send me details.
  • Siddhesh Sane said on January 12, 2012
    Please help me know what needs to be done to start up a commercial flour as well Kitchen Scale flour milling company. I need supply it to classes as well as masses for e.g to hotels in bulk quantity and to cater individual needs as well . I need to know what is the set up cost and how do i go about it... in regards to buying of raw material, setting up the industry.. any subsidies given for this business by government. Please help me with this. Awaiting reply. Thanks!! I stay in Goa Contact no 9673979997
  • shashiranjan said on January 14, 2012
    Amit jee. i want to start a flour mill in buxar bihar with 10to 15 ton per day capacity .i want to produce atta/shuzi/maida.my estimated cost is 25 to 30 lakh.pls suggest me....
  • Navin Shroff said on January 15, 2012
    Dear Sir, We are planning for a Mini Flour Mill in Jharkhand with a production capacity of 5-6 MT per day. Can you supply the machinery. Please give quotation and details along with project report. Navin Shroff M.No.09199954798
  • Suhail Ahmed Khan said on January 15, 2012
    Dear Sir, We are planning for a Fully automatic flour mill in Azamgarh U.P. India. I have agriculture land. But i am not aware of cost.pls suggest me.
  • pramod p kahat said on January 18, 2012
    Dear Sir, please guide me I am interested to start my own small industry of maize bran for cattle and poultry feed. at nearby area of PUNE dist Pune Maharashtra (INDIA). I want total require machines as well as power consumptions for only 5MT / Day production. also require detailed project report. waiting your reply or please call me on +919850086406.
  • somesh goel said on January 20, 2012
    dear sir ,please guide me ,i am interested in to start my own small scale flour,maize and chokar industry at near by of rampur ,uttar pradesh. i belong to middle higher class family ,pls help me sir and reply. my mob no is 9548430038
  • Uday Prakash said on January 21, 2012
    Dear sir,please guide me in small flour mill that i am interested to start a small flour mill in sasaram (Rohtas),Bihar,and guide me that how arrange m/c and packing materials in nearest area's,my contact no is 08699393530
  • girish sawkar said on January 24, 2012
    i want make production of 5 tons per day, in form of 1.kg, 2kg, 5kg, 10kg, so i want to know the from where i can get packaging material and how much is the area and what will be the finance required to start the business. note: i am having 500 sq.mt in karnataka IDC
  • ANKIT NIGAM said on January 24, 2012
    DEAR SIR, I WANT TO KNOW WHAT IS THE PROCEDURE TO BUILT UP THE MINI ROLLER FLOUR MILL IN KANPUR (DEHAT)
    1. HOW MUCH MONEY WILL INVEST IN THIS PROJECT
    2. WHAT IS THE DURATION OF PREPARING THE BUILDING & MACHINERY SET UP
    3. HOW MUCH LAND REQUIRES IN THIS LAND FOR THIS PROJECT
    4. ME & MY BEST FRIEND (ALOK RANJAN VERMA ) WANT TO START THIS PROJECT
    5. SIR THIS PROJECT IS RIGHT FOR THIS TIME PLZ SUGGEST ME
    MY PROJECT COST IS APPROX 30-35 LACS NOT ABOVE.
    THANKS AND BEST REGARDS, ANKIT NIGAM, 91+9532689317
  • JYOTI SRIVASTAV said on January 30, 2012
    Sir, I want to set up my own business in flour milling industry near Lucknow. Please, tell me what the approximate cost will be to set up the business and major subsidies provided by SIDBI and other banks for such new establishments. I have my own land near Lucknow to grow wheat as well as I know the direct suppliers (farmers) of wheat. Thank you, Regards, Jyoti Srivastav, 07503324089
  • ashok chavan said on January 30, 2012
    sir, i want to setup 100 T/day floor mill near Wada dist:thane(MS). It is understood that there are 3 more mills in same area of 25 kms.(1) Weather i could get market & in which state Maharastra,Gujrat,MP etc.(2) whether NOC from Pollution dept. can be easily obtained as location of plant will be 300 meter away from village.(3)what will be the estimate. regards
  • keshav mahor said on January 31, 2012
    I want to need whole wheat chakki Atta processing plant in MP location.
  • Amit Sharma expert adviser said on February 1, 2012
    @ashok chavan,
    1. Yes you can easily get the market if you are manufacturing quality products.
    2. NOC is easily available for flour mills as the modern technology used in flour milling produces no sound or drainage which can obstruct in getting NOC.
    3.Estimated Project cost is INR 2.5 Crores.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Prasad said on February 3, 2012
    Dear enthusiastic entrepreneurs..I wish most of you have already gotten into this business. Can anyone please send me operational economics and financial model of running small scale atta chakki/flour mill of capacity 0.5 -1 ton per hour. Atleast few details such as CAPEX and OPEX are highly appreciated. Thank you in advance for comments.
  • AJIT KUMAR said on February 6, 2012
    GAYA BRAND -LAXAMA SIR I WANT TO START A FLOWER MILL. MY BUDGET IS 40 LACK. GIVE SOME ADVICE SIR -MOBILLNO08521787438
  • rohan jadhav said on February 8, 2012
    I want to start a floor mill in kolhapur location which is based in maharashtra with 2.5 cr so can u please help me out in the same. I want to start it under central Govt. scheme.So please guide me in the same.
  • sunil singh said on February 14, 2012
    i want to start a flour mill ,how much will it cost to open flour mill so help me . 09389697534 e mail. manav_mohile@rediffmail.com
  • tumusiime gilbert said on February 15, 2012
    i harvested 8 tones of maize and i want you to help me and advise me how can i package my flour for efficient market. am in kampala uganda east africa.
  • omprakash said on February 16, 2012
    respected sir, i want to set up my own mini flour mill. pack size 5kg, 10kg. what would be the cost overall. surajgarh jhunjhunu(raj.)
  • Rakesh Thakur said on February 16, 2012
    I am Rakesh Thakur from Ghumarwin Distt Bilaspur Himachal Pradesh. I want to start my own Flour mill. So could you please give me some ideas about Flour Mill that How much area we need for starting and how much investment need and about machinery etc then I will take take good decision about all. I shall be thank full to you for this.
  • Jalpa Patel said on February 16, 2012
    I am in North Carolina USA. I want to start my flour mill business here at small scale. Please help me understand the market of this business. I am mainly interested in Wheat flour.
  • praveen said on February 17, 2012
    i want to start a 200 ton / day flour mill in bhabhua bihar please tell me the availability of raw material there and project feasibility. also tell me the incentive available from bihar govt. for flour mills
  • shansha sarover said on February 18, 2012
    dear sir, i want to set up a fresh chakki atta mill in giridih, jharkhand.i have sufficient land. please tell how much money do i require to start with 2t/hr capacity. machinery cost details of the machinery supplier. best rgrds thanx
  • anupam jain said on February 19, 2012
    Dear sir, i want to start flour mill in tikamgarh (mp)so pls tell me how much cost is require for that and where i have to sell that flour. pls tell me finance process to take loan. regards anupam jain 9326615082
  • sudhir kumar said on February 20, 2012
    Dear sir, first of all i am very much thankful to you for such a good cause of consultancy. i would like to start any business which belongs to rural raw materials and the first business which comes in my mine is FLOUR mill ,i am a working professional and now would like to setup my own business.pl advice on the same for starting the business at very low cost. pl send me the financial aspects of the business as well scientific areas to produce the quality product.no matter if margin is law. i have my own place in village and would like to set there only. thanks in advance, sudhir chaudhary, uttar pradesh, india
  • rituraj singh said on February 21, 2012
    hello sir i want to start a flour mill business in distt "JP Nagar" UP. please send me the details of marketing. project cost, operation and further details. thankyou
  • shashi ranjan singh said on February 26, 2012
    i am from motihari, dist- east champaran, bihar - 845401. i have to establish a flour mill on medium scale. please guide me regarding it's establishment cost which includes plant & machinery, working capital etc.
  • suresh sharma said on March 1, 2012
    dear sir , i want to start small scale flour mill with 30 lacks . is the 30 lacks sufficient or not and please give complete guide to start a flour mill with 30 tan per day capacity .
  • venkatesan said on March 4, 2012
    We want to buy mini maize flour mill machinery. Please let me know about supplier for machinery
  • yadvendra singh said on March 5, 2012
    i am from gwalior (m.p.). dear sir, i want to setup a flour mill with a capital investment around 20 lakh. please give complete guidance.
  • gourav chauhan said on March 6, 2012
    Dear mr AMIT G, i m interested to start my own flour mill in ambala, haryana. Is that right place to start ? Will u please suggest me some good manufacturer? i'm interested to setup Roller Flour Mill, pls suggest should i go 4 this ? And pls send me approx cost for cap. 1t/hr . please provide all details on my email id. Gourav chauhan Sr. Design Engineer, 08950462565, gourav_lionheart2012@yahoo.com
  • avakash garg said on March 12, 2012
    i want to setup a roller flour mill in kantabanji dist bolangir odissa so i want to know to about roller flour mill machinery manufacturer.. pls suggest good supplier..
  • Ashish Tiwary said on March 13, 2012
    i want to start a flour mill in palamau dist jharkhand.. so pls tell me roller floor machinery manufacturer.. so pls suggest for this.
  • jay bothra said on March 14, 2012
    i want to start a flour mill in BIKANER Rajasthan.. so pls tell me roller floor machinery manufacturer.. i want make production of 5 tons per day, so pls suggest for this
  • shailesh solankli said on March 19, 2012
    Hello Guys, I want to Sell my Small scale Flour Mill. It has 8 machines, various things. You don't have to purchase any extra things apart from Electric connection. Please call me on 09981981073 who is interested to purchase the four Machines and wants to start new carrier. Thanks
  • Steve mwaniki said on March 20, 2012
    I would like to start a small maize mill in Nakuru, Kenya. I would appreciate to receive appropriate technical information and alternatives for machinery available and resulting products with regard to quality and popularity in Kenya. Many thanks
  • deepanshu bansal said on March 20, 2012
    hello amit sir. sir i have no problem of space to start a floor business.....and i can afford around 1 crore initial to start it..so plzzz tell me can i be able to start it at this amount (including machines) help me.........i m at dhampur(dist. bijnor)
  • AMANDEEP SINGH said on March 21, 2012
    SIR I WANT TO Start flour mill in punjab. sir kindly please tell me how much space and investment we need to start this project.
  • Shreedhar Vasani said on March 23, 2012
    Can anyone tell me what is the market size of Branded Wheat Atta and unorganized wheat atta in urban and rural area? Any Primary Study before starting Mfg? Thanks, Shreedhar Vasani, Rajkot, Gujarat 9327667417
  • Bimal Kumar Jalan said on March 25, 2012
    We have taken up the manufacturing of purifier less rural roller flour mill with a capacity as low as 12 TPD, to produce atta, maida and bran
  • Amit Sharma expert adviser said on March 25, 2012
    @deepanshu bansal, If you have Land and The budget of Rs. 1 Crore you can start the Chakki Fresh Atta Plant with the capacity of 2 Ton/Hour. For Process Setup you can mail me any time. As your location is Bijnor then you might heard of the brand name " Raama Bhoj" its in kiratpur, which is setup and operated by us.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Bimal Kumar Jalan said on March 25, 2012
    Dear Mr Deepanshu Bansal, I am at the helm of a company under the name and style of Ranglal Surajmal Pvt Ltd. registered under the companies act 1956 and I am based at Ranchi in the state of Jharkhand Please inform me the cost of construction per square feet or per square meter at your end and your budget for complete plant and machines including building. I can definitely workout a Roller Flour Mill for you to produce premium products. You may send the information required by me to "ranglal@yahoo.com"
  • kuldeep jaiswal said on April 6, 2012
    i need to start atta mills how many license is required in india
  • zahir vadsariya said on April 7, 2012
    hi, i am from keshod-junagadh-gujarat. i wanna start any new business abt mini flour industry. what can i do? and how get row materials, machine, and how can sell our products. pls provide me full information.
  • santosh more said on April 17, 2012
    please provide the information regarding which certificate is required to start the plant of manufacturing of wheat flour, atta, suji, maida, besan
  • aftab said on April 18, 2012
    dear sir please tell me the price of 6 and 8 roller flour mill if purchase from india. i want to establish in pakistan punjab. i have land but need for information for the said flour mill. your early response will be highly appreciated. regards aftab
  • shrenik chougule said on April 18, 2012
    Hello, i want a minimum cost of the roller flour mill mostly to the cattle feed.
  • Amit Sharma expert adviser said on April 19, 2012

    @aftab, Cost of Indian Machinery and Electrical for 6 Roller Mill Plant is 1.5 Crores INR and For 8 Roller Mill Plant is 1.8 Crores INR.

    @santosh more, All the details about Procedure to start the flour mill is already posted here many times. Read the old comments.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Mrityunjay Nagar said on April 21, 2012
    Dear, sir/mam i want to establish my own business a flour mill (commercial level) at Kota, Rajasthan India so i wanna know all kind of information regarding it such as basis legal obligations, rules & regulations, plant layout cost, machinery cost, overall total investment etc. So please suggest me with better response Regarding :-MRITYUNJAY NAGAR, Contact no. 09461516353
  • Ranjeet Singh Siddhu said on April 22, 2012
    Dear Sir/Madam, Please can i get full details and plan of wheat flour mill project, from making of wheat flour to sale in market. Please i need your guides. 09823685199 rajsiddhu21@yahoo.co.in India
  • ASHOK TV said on April 27, 2012
    I want to start a flour mill business with less investment initially. But I am looking forward to expand the business gradually. I want to take this up as a full fledged project and am ready to quit my current job. I need to know in detail what it takes for me to start a flour mill business from the scratch. Also kindly advice me on the rules and regulations that are part of this business. How to go about finding the potential market. Everything that is involved in this business A-Z. I live in Bangalore FYI.
  • BULAMARWA INVESTIMENT LIMITED said on May 19, 2012
    Am interested in your equipment please can you give us more information about your products and services. Because we wants to build a new flour mill company in republic of chad.
  • Nitin k. Singh said on May 20, 2012
    Dear Amit, I want to start my own mini-medium size flour mill in Lucknow, for this plz let me know cost of machinery, legal obligations etc ..... regards Nitin k. Singh @ Lucknow reply at ( hr.nitinsingh@gmail.com)
  • Nirmana Pandithage said on May 20, 2012
    I am young citizen in Sri Lanka. I have managed to start the medium scale rice flour making factory in my home town. I have created business plan for it. Also I want to know some details. How can I buy medium scale rice flour making machineries and get there details? Can I find a person who likes to invest in that type of business. Please send me your ideas. Thank you.
  • Anil said on May 27, 2012
    Hello Sir, this is Anil from Pathankot, i want my own flour mill at my village near Pathankot (punjab) Please tell me about machinery, Subsidy, license & other formalities to start the same. I have a own space 2000 Sq ft Approx to start the same so for all other formalities what will be budget of my project.. Thanks Anil
  • Aashish jain said on May 28, 2012
    i want to start my flour mill for supply of big brand and also want to make our brand. give me suggestion. thanks
  • Janata Flour Mills said on May 30, 2012
    We are looking for a professional consultancy services for setting up a flour mill in Mumbai. Preparation of project report to optimally utilisation of the space, with identification of the right machinery & setting up. You can contact me on Mr Jadhav - 9821299425
  • Binod said on June 3, 2012
    I want to establish a flour mill in Imphal, Manipur. I have 32,000 sq ft. of land. I intend to produce 40 Metric Ton per day of flour. Please tell me about machinery cost, civil work cost, including godown etc. With this I would like to know the necessary requirements for the fulfillment of my project on a wheat flour mill. Please Help. Thank you.
  • Suresh Raghuvanshi said on June 3, 2012
    Sir I want to start Flour mill in Madhya Pradesh(Indore). Sir kindly please tell me how much space and investment and machinery. Sir please give me the full details for starting this business. Please help Thank you. Regards Suresh
  • boota ram said on June 6, 2012
    Dear Sir, I want to setup an commercial flour mill at Bathinda punjab and I have sufficient land for this unit kindly guide me about expenditure and exposure in this line. with regards boota ram
  • Binay Jalan said on June 6, 2012
    Hi @Amit Sharma, I am planning to set up wheat flour mill with the capacity of 10T/day, can you please help me out with the minimum area required for setting up the chakki aata mills.
  • Abdul said on June 17, 2012
    Hi Amit, i own a chakki in bangalore and would like to take my business to the next stage what would your opinion be on setting a small Scale industry start up.. and in karnataka which is the best place to start the business and the amount for setting the company Regards, like ur post very much :)
  • Anand Nijasure said on June 17, 2012
    We want start Mini Flour mill not for large scale but initially for Domestic Purpose between 200 to 300kgs/day & then on large scale I need your guidance for machinery. space, working capital etc Thanks Anand Nijasure
  • amit kumar sharma said on June 20, 2012
    Dear sir, i would to like start this business in rural area. please give me advise and procedure of loan for this. location is-district- Mirzapur, Uttar pradesh-231305
  • anuj singh said on June 22, 2012
    i am an engineering graduate, i am staying in Aligarh(U.P). I Want to start my own flour mill, mustard oil mill & rice mill in Aligarh. How much initial capital is required to start my business and how much land is required for it. I would like to know what all machineries & equipments needed for it. what will be the right & legal process for starting this. what are your suggestions for starting this business in one time or one by one.
  • HIMANSU BHUSAN SAHOO said on June 26, 2012
    I want to start a flour mill in orissa at my location with invest of 20 lakhs of PMEGP LOAN and 10 lakhs of personal investment. So may i know the project report of flour mill and cost price of machines & equipments needed for it ?
  • sunil kumar murarka said on July 9, 2012
    hi @Amit Sharma this is the owner of mithila flour mills darbhanga bihar pls contact me at 09334910720 :i produce about 400 tones everyday and need ur help in setting up another modernised flour mill of capacity 200 tonnes per day in bihar itself looking forward for ur feedback thank you
  • ashish said on July 15, 2012
    hi i am ashish from bareilly. i want to start a small scale chakki plant but i can't know that the gov. give a subsidy in that business or not plz. tell me and what is the procedure.
  • pragya jaiswal said on July 26, 2012
    hi sir please write ,needs to set up wheat flour mill at shahdol, Madhya Pradesh, India, PIN-484001. I am interested to set up Mill. Send me full details of machinery including packaging, total cost and % profit etc. Thanks, pragya
  • Sundeep Khanna said on July 27, 2012
    Hello sir I am sundeep khanna from delhi i want to start a small scale chakki plant but i don't know about that plz give detail. how to begin this business plz give me all important details of this profession. my contact no. 09560686060, 09212591277. thank you
  • jaipalreddy said on August 6, 2012
    We would like to establish wheat floor mill capacity of 10 tonnes per month so can you send details of cost machinery and total cost of project
  • yatin said on August 8, 2012
    i need to start a commercial flour milling business in town area of agra plz tell me the initial investment with full detail.
  • Tshering Penjor said on August 16, 2012
    Dear Sir, I am really interested in starting flour mill in Bhutan. Please suggest me
  • V.V.R ENTERPRISES said on August 16, 2012
    HI SIR , I AMV.VISWESWARA REDDY, M.Tech , Cell No: +91-9985894493, i want start atta mill plant , how to start ? please tell me about detail cost and investment ?
  • Palash Tiwari said on August 16, 2012
    hello, i am palash tiwari from indore, madhya pradesh ,wana start my own floor mill with the capacity of 20 ton per day and i want to start it from my house itself is that possible? and i want to sell my floor in packets so do i need a agmark for that !and if yes what is the procedure for that!? Palash Tiwari 07566402275
  • sumit said on August 20, 2012
    i want to set up a rawa, bran, maida and chakki plant with a capacity of 200 tonne per day i want the estimated project cost of machinery including civil constructions for indian and imported machinery of best quality.
  • Rohit Bansal said on August 20, 2012
    Sir i want to start a besan plant with the quality like Sona Sikka Besan of Katni with a capital of 2 crore can you suggest be best quality plant.
  • devinder singh said on August 20, 2012
    hello amit ji, i want to settle flour mills in kurukshetra and how much cost for 50 tonne flour mills i am interested to that. please give me information about it. thanks.
  • vikash bansal said on August 21, 2012
    Dear amitji i want to start a roller flour mill plant of 40mt per day i want total details of plant machine total project report + investment i totally new for this plant
  • vikram singh said on August 21, 2012
    sir i want to start my own business of masala plant like coriander, chilli, turmeric powder in ajmer rajasthan. please tell me the total investment required. plant capacity will be 100 to 200 kg per hour. thanking you, vicky 9740530120
  • sanjay sa said on August 24, 2012
    dear sir/madam, I'm Sanjay.SA from Belgaum, Karnataka, India. I am interested to implement new small scale industry in our area. Here main crop is maize, So i request you to give guidance and details regarding small scale industry new units of maize(corn) product.(Corn Mill,corn dry milling etc).sanj.ang1@gmail.com
  • Amit Sharma expert adviser said on August 24, 2012
    @sanjay sa, Belgaum is famous for producing good quality of corn and starting a Corn (dry) mill there is always feasible. You can mail me with your desired capacity and the budget to invest in this business.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

  • Ravi Aggarwal said on August 26, 2012
    @Amit Sharma ji I have Rs 5 Crore and i want to set up a flour mill with maida, rawa and bran with a capacity of 400 tonne per day in Dhanbad. I want to know the project cost and the cost of machinery with the name of there supplier. whether there is any difference in quality of output or cost of machinery when we have a choice to import the machinery or buy it from indian mfr.
  • Amit Sharma expert adviser said on August 26, 2012
    @Ravi Aggarwal, With the budget of Rs. 5 Crore you cannot setup a flour mill of capacity 400 TPD with imported machinery. for your kind information, Many European and German companies are manufacturing same quality (Imported) machinery in india itself. Catch me on my email ID if your seriously interested to setup a 400 TPD Plant.

    Amit Sharma (amitsharma@consultant.com)
    Milling Technologist

Comment

(All the above fields are required.)